Coatings for Dielectric Mirrors
Description
Intlvac systems can produce a wide range of multi-layer, dielectric coatings depending on customer requirements. Custom filter options are available using a diverse range of substrates for applications in the VIS, NIR, SWIR, and MWIR spectral regions. Coating examples include:
1. BANDPASS FILTERS
- Coating Description: a bandpass filter is designed to transmit energy only within a selected band of wavelengths in the spectrum and reject all other wavelengths
- Durability Performance: Adhesion, severe abrasion, humidity as per the following (where applicable): MIL-C-675, MIL-M-13508, MIL-M-14806, MIL-C-48497, MIL-F-48616, MIL-STD-810F
2. LONG WAVE PASS (LWP) FILTERS
- Coating Description: a long-wavelength pass filter transmits energy at wavelengths longer than the cut-on wavelength while energy at wavelengths shorter than the cut-on is attenuated.
- Durability Performance: Adhesion, severe abrasion, humidity as per the following (where applicable): MIL-C-675, MIL-M-13508, MIL-M-14806, MIL-C-48497, MIL-F-48616, MIL-STD-810F
3. SHORT WAVE PASS (SWP) FILTERS
- Coating Description: a short-wavelength pass filter transmits energy at wavelengths shorter than the cut-off wavelength while energy at wavelengths longer than the cut-off is attenuated.
- Durability Performance: Adhesion, severe abrasion, humidity as per the following (where applicable): MIL-C-675, MIL-M-13508, MIL-M-14806, MIL-C-48497, MIL-F-48616, MIL-STD-810F
4. NEUTRAL DENSITY FILTERS
- The purpose of the neutral density (ND) coating is to attenuate the incident flux. In its simplest form, the thickness of a single metallic layer is adjusted so that a prescribed transmittance is attained.
Coatings for Dielectric Mirrors
Specifications |
|
|---|---|
| Coating Type: | VIS - NIR, MWIR, MWIR, Other |
| Angle Of Incidence (AOI): | Not Specified |
| Wavelength Range: | 1-1nm |
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim Intlvac Thin Film Page to edit and add data
Frequently Asked Questions
Intlvac systems can produce a wide range of multi-layer, dielectric coatings depending on customer requirements.
Custom filter options are available using a diverse range of substrates for applications in the VIS, NIR, SWIR, and MWIR spectral regions.
A bandpass filter is designed to transmit energy only within a selected band of wavelengths in the spectrum and reject all other wavelengths.
A long-wavelength pass filter transmits energy at wavelengths longer than the cut-on wavelength while attenuating energy at wavelengths shorter than the cut-on.
The purpose of a neutral density (ND) coating is to attenuate the incident flux by adjusting the thickness of a single metallic layer to achieve a prescribed transmittance.