Mirror Coatings Dielectric High Reflectors
Description
High reflectors, sometimes referred to as laser mirrors, are used when a very high amount of light is needed to be reflected. They typically reflect between 99.0% to 99.995% with scatter as low as 50ppm. The angle of incidence and the center wavelength can be optimized from 0 to 70 degrees, and between 193nm and 3000nm. This type of coating does not usually provide a wide range of performance. Our most commonly produced designs are at 248nm and 308nm, at 0 and 45 degrees incident angles, along with all other major laser lines.
Mirror Coatings Dielectric High Reflectors
Specifications |
|
|---|---|
| Coating Type: | VIS |
| Angle Of Incidence (AOI): | Not Specified |
| Wavelength Range: | 450-590nm |
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim Guernsey Coating Laboratories Page to edit and add data
Frequently Asked Questions
High reflectors, also known as laser mirrors, are used when a very high amount of light needs to be reflected.
Our most commonly produced designs are at 248nm and 308nm, at 0 and 45 degrees incident angles, along with all other major laser lines.
The angle of incidence and the center wavelength can be optimized from 0 to 70 degrees, and between 193nm and 3000nm.
High reflectors typically reflect between 99.0% to 99.995% with scatter as low as 50ppm.
This type of coating does not usually provide a wide range of performance.