Frequently Asked Questions

Accessories available for the MM33 manual micromanipulator include a Z-axis stop, magnetic stand M1 (turn-, tilt- and shiftable), magnetic stand M2 (turn- and tiltable), and a tilting device.

The MM33 manual micromanipulator has manual movement in 3 axes (XYZ), control knobs mounted in line on the rear of the micromanipulator, coarse adjustment with 0.1 mm reading accuracy, fine adjustment by micrometer screw with 0.01 mm reading accuracy, and an optional Z-axis stop that avoids lowering of the micromanipulator (drift) when working with weighty loads.

The MM33 manual micromanipulator is available in four order options: right-sided with clamp ½”, left-sided with clamp ½”, right-sided with tilting device, and left-sided with tilting device.

The MM33 manual micromanipulator has a travel range of 37 mm in the X-axis, 20 mm in the Y-axis, and 25 mm in the Z-axis. It has a fine adjustment of 10 mm and is made of aluminum with an anodic coating and black lacquered surface. It weighs approximately 650 g.

The MM33 manual micromanipulator is used for electrophysiological experiments with oocytes that do not require ultra-precise manipulation of the electrodes.

You May Also Like