All Categories

FILTER PRODUCTS

  1. Home
  2. Motion Control
  3. Positioners
  4. Base Positioners
Side-Drive Ball-Slide Positioning Stages
Isotech Inc
Add to watch list
Side-Drive Ball-Slide Positioning Stages
Compare
For applications requiring the smallest footprint possible, Isotech offers the SD Series Side Drive Ball Slide Positioning Stages with side mounted micrometers. A wide range of sizes are available with travels ranging from .25″ to 2.0″. All units are available in X, XY and XYZ configurations and can carry load ranging from 4 lbs on ...
  • Type Of Base Positioner: Single Axis Tilt Stage, Multi-Axis Tilt Base
Data Sheet
Ball Slide Positioning Stages
Isotech Inc
Add to watch list
Ball Slide Positioning Stages
Compare
Positioning Stages with travels ranging from .25″ to 4.0″. All units are available in X, XY and XYZ configurations and can carry load ranging from 4 lbs on our miniature ball slide series all the way up to 60 lbs on our larger sizes. Straight line positioning accuracy is up to 0.0005″ per inch of travel. All positioning stage model ...
  • Type Of Base Positioner: Single Axis Tilt Stage, Multi-Axis Tilt Base
Data Sheet
Crossed Roller Positioning Stage
Isotech Inc
Add to watch list
Crossed Roller Positioning Stage
Compare
Isotech offers a wide range of micrometer driven Crossed Roller Positioning Stages with travels ranging from .25″ to 3.0″. All units are available in X, XY and XYZ configurations and can carry load ranging from 23 lbs all the way up to 160 lbs. Straight line positioning accuracy is 0.0001″ per inch of travel. All positioning stage ...
  • Type Of Base Positioner: Single Axis Tilt Stage, Multi-Axis Tilt Base
Data Sheet
Precision Positioning Stage PPS-20SM
MICRONIX USA LLC
Add to watch list
Precision Positioning Stage PPS-20SM
Compare
The PPS-20 Stepper Motor version is suitable for applications requiring high speed and high blocking force. Miniature crossed roller bearings assure high stiffness and guiding accuracy for loads up to 20 N (horizontal orientation). It utilizes a 2-phase stepper motor resulting in high speed (> 5 mm/s) and high blocking force ...
  • Type Of Base Positioner: Single Axis Tilt Stage
Data Sheet
Manual Micromanipulator MM 33
Npi electronic GmbH
Add to watch list
Manual Micromanipulator MM 33
Compare
For electrophysiological experiments with oocytes, ultra-precise manipulation of the electrodes is usually not required. Märzhäuser\'s MM33 manual manipulator is the low-cost alternative to expensive piezo-driven, electric or hydraulic manipulators.  
  • Type Of Base Positioner: Multi-Axis Tilt Base
Data Sheet
HS1.30 Aperture Nanopositioner
Piezoconcept
Add to watch list
HS1.30 Aperture Nanopositioner
Compare
The HS1H is a compact nanopositioner which can be combined to form 2 or even 3-axis nanopositioning systems. It is available with 10, 30, 50, 70 or 100µm range of motion and has a central aperture of 33 mm, making it ideal for optical microscopy applications. It has a particularly fast step response time due to the direct drive ...
  • Type Of Base Positioner: Multi-Axis Tilt Base
Data Sheet
HS1.10 Nanopositioner
Piezoconcept
Add to watch list
HS1.10 Nanopositioner
Compare
 The HS1 is a compact nanopositioner which can be combined to form 2 or even 3-axis nanopositioning systems. It is offered with 10, 30, 50, 70 or 100 µm range of motion, it is also available with an aperture (see HS1H). This nanopositioner is part of our high-speed product line (High power controller available).
  • Type Of Base Positioner: Multi-Axis Tilt Base
Data Sheet
Z-STAGE 5 Nanopositioner
Piezoconcept
Add to watch list
Z-STAGE 5 Nanopositioner
Compare
 The Z-STAGE is a compact Z direct-drive nanopositioner which has high speed capabilities. It can be combined with a 2 axis nanopositioner with a 66×66 mm aperture (LF2/LFHS2) in order to get a SPM3 or a SPM3LR. The Z stage is available with either 5, 10, 30 or 50µm range of motion. This ...
  • Type Of Base Positioner: Multi-Axis Tilt Base
Data Sheet
POSITIONERS WITH MICROMETERS P502MLX
PIC Design
Add to watch list
POSITIONERS WITH MICROMETERS P502MLX
Compare
POSITIONERS WITH MICROMETERS: P502MLX.
  • Type Of Base Positioner: Single Axis Tilt Stage
Data Sheet
POSITIONERS WITH MICROMETERS P502MLXYZ
PIC Design
Add to watch list
POSITIONERS WITH MICROMETERS P502MLXYZ
Compare
POSITIONERS WITH MICROMETERS: P502MLXYZ.
  • Type Of Base Positioner: Multi-Axis Tilt Base
Data Sheet
POSITIONERS WITH MICROMETERS P502MLXY
PIC Design
Add to watch list
POSITIONERS WITH MICROMETERS P502MLXY
Compare
POSITIONERS WITH MICROMETERS: P502MLXY.
  • Type Of Base Positioner: Multi-Axis Tilt Base
Data Sheet
Magnetic Kinematic Base - 6MKB-175
Altos Photonics, Inc.
Add to watch list
Magnetic Kinematic Base - 6MKB-175
Compare
Magnetic Kinematic Base 6MKB175. You lift the units mounted on the platform as a group. The platform is replaced with a repeatability of 50 μm. The platform has patterns of M4 and M6 mounting holes. Alternatively, fit M6 screws through its clearance slots from beneath. Two high strength  magnets lock the platform to the ...
  • Type Of Base Positioner: Kinematic
Data Sheet
Kinematic Bases - 6KB
Altos Photonics, Inc.
Add to watch list
Kinematic Bases - 6KB
Compare
Kinematic Base 6KB is used for repeated positioning of groups of units mounted on its platform. A platform has M6 mounting holes. Alternatively, fit an M6 screw through a clearance hole from beneath. You unhook the platform from the bottom plate of the kinematic base and stow it away with all the units still mounted. Later you ...
  • Type Of Base Positioner: Kinematic
Data Sheet
Pitch & Yaw Platform - 7FA5
Altos Photonics, Inc.
Add to watch list
Pitch & Yaw Platform - 7FA5
Compare
Pitch & Yaw Platform.
  • Type Of Base Positioner: Multi-Axis Tilt Base
Data Sheet
Roll & Pitch Platform - 7FA3
Altos Photonics, Inc.
Add to watch list
Roll & Pitch Platform - 7FA3
Compare
Roll & Pitch Platform.
  • Type Of Base Positioner: Kinematic
Data Sheet
Large Multi-Axis Platform - 600TTR
Altos Photonics, Inc.
Add to watch list
Large Multi-Axis Platform - 600TTR
Compare
Super stable large multi-axis platform for large and heavy mirror, Ø about 600 mm.
  • Type Of Base Positioner: Multi-Axis Tilt Base
Data Sheet
Tilt Stage - 6TS29-21
Altos Photonics, Inc.
Add to watch list
Tilt Stage - 6TS29-21
Compare
Tilt Stage: Tilt x ±3°, Tilt y ±3°
  • Type Of Base Positioner: Multi-Axis Tilt Base
Data Sheet
Multi Axis Tilt Platform - 6TP116-001
Altos Photonics, Inc.
Add to watch list
Multi Axis Tilt Platform - 6TP116-001
Compare
Multi Axis Tilt Platform wit Tilt y ±2  and Rotation z ±1,5° functions.
  • Type Of Base Positioner: Multi-Axis Tilt Base
Data Sheet
Tilt Platform - TP125
Altos Photonics, Inc.
Add to watch list
Tilt Platform - TP125
Compare
Tilt Platform provides two axes of angular adjustments, allowing a mounted component to be oriented parallel to an arbitrary plane.
  • Type Of Base Positioner: Multi-Axis Tilt Base
Data Sheet
Adjustable Laser / Laser Head Holder - 6LH
Altos Photonics, Inc.
Add to watch list
Adjustable Laser / Laser Head Holder - 6LH
Compare
Adjustable Laser/Laser Head Holder 6LH is for repeatable mounting and drift-free pointing of laser heads and other cylindrical objects. You may easily reposition the two supports to select an optimal basis for cylindrical objects of differing lengths (basis of 25, 50 or 70 mm). 6LH is made of black anodized aluminium and is equipped ...
  • Type Of Base Positioner: Multi-Axis Tilt Base
Data Sheet
Tilt and Rotation  Stage - 6PT110
Altos Photonics, Inc.
Add to watch list
Tilt and Rotation  Stage - 6PT110
Compare
Tilt / rotation stage 6PT110 provides two independent tilt adjustments within ±5° range and ±5° in-plane rotation adjustment. Precision screws provide 9 arcsec resolution in rotation and both tilt planes (adjustment screws M6×0.25, 3 pcs.). The mounting clamp with a spring-loaded disengagement knob allows easy insertion and removal ...
  • Type Of Base Positioner: Multi-Axis Tilt Base
Data Sheet
Three Angle Prism / Beamsplitter Table - 6PT169
Altos Photonics, Inc.
Add to watch list
Three Angle Prism / Beamsplitter Table - 6PT169
Compare
Three Angle Prism / Beamsplitter Table 6PT169 provides non-calibrated tilt motion in three planes. It is ideal work platform for prisms, beam splitters and mirrors, which needed to be precisely adjusted in angle about three orthogonal axes. Various opto-mechanical mechanisms can be quickly and conformably attached to the top of the ...
  • Type Of Base Positioner: Multi-Axis Tilt Base
Data Sheet
Multi-Axis Tilt Platform - 6TP116
Altos Photonics, Inc.
Add to watch list
Multi-Axis Tilt Platform - 6TP116
Compare
Multi-Axis Tilt Platform 6TP116 provides angular adjustment about two-axis - tilting and in-plane rotation. The mounting platform is rotated around kinematic pivot point by two micrometers. The out-of-plane tilting range is ±2° and the in-plane rotation range is ±2.5°. Two micrometers screws are located side by ...
  • Type Of Base Positioner: Multi-Axis Tilt Base
Data Sheet
Tilt Stage - 6TS62(72)
Altos Photonics, Inc.
Add to watch list
Tilt Stage - 6TS62(72)
Compare
A Single-Axis Tilt Stage 6TS62 provides tilt range of 6° with 6µrad sensitivity. Pivot is done on two hardened steel balls. The base has M6 tapped holes on four sides, to fasten the platform, for example on mounting posts 3MP. Use our screws list to choose suitable screw see example in ordering table (there are shown most ...
  • Type Of Base Positioner: Single Axis Tilt Stage
Data Sheet