1024L1 LINEAR ARRAY
Description
The 1024L1 is a 1024x1 state of the art InGaAs linear array imager on 12.5µm pitch that was built for both spectroscopy and machine vision in the Short Wave Infrared Band. The 1024L1-12.5-T is an advanced digital array with the lowest read noise available <110e- for a 250μm tall pixel. Our new advanced SWIR On-chip Noise Suppression Circuit will enable some spectroscopic applications to see read noise levels <80e-. A single ROIC chip is used thus minimizing variation from output to output found on linear arrays with multiple ROICs. The chips have built in 14bit A/Ds that are designed for the system thus maximizing dynamic range and minimizing the noise while enabling 34klines/s at 1024 elements. Multiple full well capacities from 75ke- to 100Me- with 128steps are available to optimize the array for the signal levels. On chip optical pixel binning (where every other detector is disconnected from the ROIC thus signal is captured by neighboring pixels) is available by command to trade spectral resolution for increased signal level. Pixel skipping or binning is also available allowing for 48klines/s at 512 resolution on the same imager. This lattice matched InGaAs array is backside illuminated enabling detection from 0.4 to 1.7μm with no bond pads or wires in the way of your signal and minimize stray reflections found in front side illuminated arrays with many wire bonds near the active imaging area. The array can be customized to allow optical filters to be placed on the active detector area something that is nearly impossible in front side illuminated devices. Arrays standardly come in a 56pin J-wing package with a single stage TEC but we can provide no TEC packages as well as arrays on submounts. Please contact you PIRT representative for more details.
1024L1 LINEAR ARRAY
Specifications |
|
---|---|
# Pixels (Resolution): | <=1000 |
Pixel Size: | 12.5um X 250um |
Frame Rate: | 32 scans/sec |
Features
1024x1 resolution
Small 12.5µm pitch
Response from 0.4-1.7μm (Backside Illuminated)
250μm tall pixel
QE>75% from 1-1.6μm
<100e- read noise with SWIR On Chip Noise Suppression Circuit
14 bit A/D on chip >6000:1 dynamic range
75ke- to 100Me- full well
Applications
Thermal Imaging in SWIR
Contaminant Detection
Chemical Detection
Moisture Detection
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
-
Ships from:
United States
-
Sold by:
-
On FindLight:
since 2020
Frequently Asked Questions
The 1024L1 linear array is suitable for thermal imaging in SWIR, contaminant detection, chemical detection, and moisture detection.
The pitch of the 1024L1 linear array is 12.5µm.
The 1024L1 linear array has a read noise level of <110e- for a 250µm tall pixel, and <80e- for some spectroscopic applications with the SWIR On-chip Noise Suppression Circuit.
The 1024L1 linear array has a resolution of 1024x1.
The 1024L1 linear array has a response range of 0.4-1.7µm.