MTP 105 Open Loop Actuator
Description
The actuators offer a very stiff design that is capable of generating blocking forces as high as 1000N (MTP-15). This characteristic enables the actuator to drive demanding loads of up to a maximum 10kg (MTP-15) in the Z-axis. Driving the MTP actuator over nominal range simply requires a 0V to 120VDC HV amplifier. However, if required, it is possible to achieve additional range by using a -30V to 150VDC capable HV amplifier. If a small form factor and closed loop performance is required the MTP can be used in conjunction with a Queensgate’s position measurement system. This provides capacitive position sensing for sub-nanometre precision with the benefit of independent sensor placement from the actuator. This allows the freedom to mount the sensor plates at any convenient point on the host fixture.
MTP 105 Open Loop Actuator
Specifications |
|
|---|---|
| Microstep Size (default Resolution): | 105 um |
| Built-in Controller: | Yes |
| Travel Range: | 0.105 mm |
| Accuracy (unidirectional): | -- um |
| Backlash: | Not Specified |
| Maximum Speed: | -- mm/s |
| Minimum Speed: | -- mm/s |
| Axes Of Motion: | Three |
Features
Metal case for protection
Maximum load of up to 10Kg
15, 30, 45, 75 or 105 μm travel options with sub-nanometer resolution
Internal preload
Reliable with a long lifetime
Simple to install and compact for OEM applications
Supported by a full range of accessories
Applications
Optical cavity tuning
Micromanipulation
Fine position control
Custom nanopositioning devices
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
-
Sold by:
-
On FindLight:
External Vendor
Claim Prior Scientific Inc Page to edit and add data
Frequently Asked Questions
The MTP actuator can be used for optical cavity tuning, micromanipulation, fine position control, and custom nanopositioning devices.
The MTP actuator can handle a maximum load of up to 10kg.
The MTP actuator has travel options of 15, 30, 45, 75 or 105 μm with sub-nanometer resolution.
The MTP actuator can be driven over nominal range with a 0V to 120VDC HV amplifier. However, an additional range can be achieved by using a -30V to 150VDC capable HV amplifier.
The MTP actuator can be used with a Queensgate’s position measurement system, which provides capacitive position sensing for sub-nanometer precision with independent sensor placement from the actuator.