Wire Die Inspection Microscopes DM390Z

Fort Wayne Wire Die Inc

OVERVIEW

Specifically designed for visual inspection of die geometry, Fort Wayne Wire Die’s DM300 Series microscopes enable you to inspect the surface of your dies for better finished wire quality. By combining a superior optical alignment with a specially adapted light source, the DM300 Series helps you locate surface flaws and wear patterns. Magnification capabilities allow you to evaluate proper die geometry and polish in dies as small as 0.050mm (.002"). In addition, the die stage slides, rotates and tilts providing a continuous rotational examination of the die’s internal surface profile. With a range of models, from the full-service DM390ZT to the economical DM340, there is a microscope perfect for your application. Setup and operation is easy. For more information, contact a Fort Wayne Wire Die representative.

SPECIFICATION

Supported Objectives: 0.5x, 1x, 2x, 7.5x, 50x, 100x, Other
Illumination: Coaxial, Ring Light (lateral)
Focus Control (Z Adjustment): Coarse
XY Mechanical Stage: Not Included
Eyepiece: 1 - 10x

Download Data Sheet

Fort Wayne Wire Die Inc

Are you Fort Wayne Wire Die Inc representative?

No one from Fort Wayne Wire Die Inc has updated the information yet

Wire Die Inspection Microscopes DM390Z

OVERVIEW

SPECIFICATION

Thank for claiming your page on FindLight!

You may also like