NarrowScan 1800 l/mm Single Grating
Description
The NarrowScan pulsed dye laser series is based on a new resonator design with a very narrow linewidth (< 0.04 cm-1) that has been optimized in design and specifications by laser experts over many years and can now be used with pump laser pulses as short as 4 ns. The laser has very rigid and massive middle and side plates, ensuring a very high stability in the oscillator and pre-amplifier.
NarrowScan 1800 l/mm Single Grating
Specifications |
|
|---|---|
| Tuning Range: | 370-900nm |
| Repetition Rate: | 1-500Hz |
| Polarization: | Unspecified |
Features
- Gratings: 1800, 2400, 3000, 3600 lines/mm
- Double-grating (bandwidth < 0.04 cm-1)
- Prismatic cell for high power output
- Frequency conversion units for doubling, trippling or mixing from 190 nm up to 4.5 μm
- „Look up“ table and /or autotracking for both conversion units
- Wavelength separation with two or four Pellin-Broka-Prism
- Temperature stabilization of the crystal-housing Improved Resonator Design
- vertical grazing incidence resonator
- larger tuning range
- lower bandwidth
- improved pulse to pulse energy stability
- Frequency stabilization
- Optogalvanic cell for laser calibration
- C++ or LabView software
- 4 digital and 4 analog inputs
- Online power monitoring of fundamental, doubled and tripled laser light
- Online bandwidth monitoring with CCD-camera
- Reversed laser design for two frequency conversion units inside the laser.
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
Germany
-
Sold by:
-
On FindLight:
External Vendor
Claim Radiant Dyes Laser GmbH Page to edit and add data
Frequently Asked Questions
The features of the NarrowScan 1800 l/mm Single Grating include gratings of 1800, 2400, 3000, 3600 lines/mm, double-grating (bandwidth < 0.04 cm-1), prismatic cell for high power output, frequency conversion units for doubling, trippling or mixing from 190 nm up to 4.5 μm, „look up“ table and /or autotracking for both conversion units, wavelength separation with two or four Pellin-Broka-Prism, temperature stabilization of the crystal-housing, improved resonator design, frequency stabilization, optogalvanic cell for laser calibration, C++ or LabView software, 4 digital and 4 analog inputs, online power monitoring of fundamental, doubled and tripled laser light, online bandwidth monitoring with CCD-camera, and reversed laser design for two frequency conversion units inside the laser.
The frequency stabilization of the laser includes an optogalvanic cell for laser calibration.
The NarrowScan pulsed dye laser series is based on a new resonator design with a very narrow linewidth (< 0.04 cm-1) that has been optimized in design and specifications by laser experts over many years and can now be used with pump laser pulses as short as 4 ns.
The laser has very rigid and massive middle and side plates, ensuring a very high stability in the oscillator and pre-amplifier.
The NarrowScan 1800 l/mm Single Grating is compatible with C++ or LabView software.