Optical Positioners

The bases for manual stages are made of aluminum alloy, they are used for connecting different stages.Baseplates in these series come in several different model as you can see from the attached specification sheet. We have the mechanical drawing of the following models of these square and rectangular baseplates:BP-A40 (40mm x ...

Specifications

Mount Material: Anodized Aluminum
Adjustments: Fixed
Thickness: 9 -10 mm (depending on the model)
Width: 40 - 100 mm (depending on the model)
Length: 40 - 175 mm (depending on the model)
Data Sheet
Zolix presents an extensive range of Right Brackets for Manual Stages, falling under the category of Fiber Alignment Stages. These models, including but not limited to PHOB-A40, PHOB-A60, PHOB-A65, PHOB-S40, PHOB-S60, PHOB-S65, PHOB-A80A, PHOB-A80B, PHOB-A80C, PHOB-A80D, PHOB-A100, PHOB-A120A, PHOB-A120B, NFP-461-ZKit, NFP-462-ZKit, ...

Specifications

Mount Material: Anodized Aluminum
Adjustments: Fixed
Data Sheet
The Mirrors.TxTy0303/1010 are compact and high-performance piezoelectric motion unit designed for room temperature (RT) applications.  The piezo-linear stage features a closed-loop control system and supports resistance type position sensing. With its ultra-quiet motion and 20 kHz drive frequency, it provides smooth and ...

Specifications

Mount Material: Custom
Adjustments: Tip, Tilt, Piston
Operating Temperature Range: ~20-80 °C
Travel Range: 3 mm
Load Capacity (Horizontal):: 0.03 kg
Data Sheet
Model BT-M Matched-Lens Refractive Beam Steerer
MetaStable Instruments Inc
Matched-Lens Refractive Beam Steerer.

Specifications

Mount Material: Custom
Adjustments: Tip and Tilt, Vertical Translation, Horizontal Translation
Data Sheet
Model BT-C2 Matched-Lens Refractive Beam Steerer
MetaStable Instruments Inc
Matched-Lens Refractive Beam Steerer.

Specifications

Mount Material: Custom
Adjustments: Tip and Tilt, Horizontal Translation, Vertical Translation
Data Sheet
Translation Stages, Kinematic Mount, Optical Rails, Posts, Post Holders, BreadBoard Accessories are made of anodized aluminium. The screws are made of stainless steel, both 0.5mm and 0.25mm pitch are available. Contract production service according to blue print is available at very competitive price.

Specifications

Mount Material: Aluminum, Anodized Aluminum, Black Anodized Aluminum, Stainless Steel, Custom
Adjustments: Tip and Tilt, Fixed, Horizontal Translation, Vertical Translation, Rotation, Custom
Data Sheet
Ealing has a wide variety of mirror mounts including kinematic, top adjust and OEM models that can hold mirror diameters up to 4 inches. Our range of mirror mounts are compatible with our ½ inch posts and post holders. Visit our website to learn ...

Specifications

Mount Material: Anodized Aluminum
Adjustments: Tip and Tilt
Data Sheet
The T-MM2 Series are motorized two axis mirror mounts. They can be controlled manually or by using the RS-232 serial interface.

Specifications

Mount Material: Black Anodized Aluminum
Adjustments: Tip and Tilt
Built-in Controller: Yes
Number Of Axes: 2
Repeatability: 0.015 degrees
...
Data Sheet
There are 8 different Optical Positioners from suppliers and manufacturers listed in this category. In just a few clicks you can compare different Optical Positioners with each other and get an accurate quote based on your needs and specifications. Please note that the prices of Optical Positioners vary significantly for different products based on various factors including technical parameters, features, brand name, etc. Please contact suppliers directly to inquire about the details and accurate pricing information for any product model. Simply navigate to the product page of interest and use the orange button to directly reach out to the respective supplier with one click.