All Categories

FILTER PRODUCTS

  1. Home
  2. Opto-Mechanics
  3. Optical Mounts
  4. Lens Mounts
  5. Fixed

Fixed Lens Mounts

Standard Frames 76.2mm
National Photocolor Corp
Add to watch list
Standard Frames 76.2mm
NPC Standard Pellicle Frames are stocked in 1″,2″,3″,4″,5″ and 6″ circular rings, plus 5″x7″ rectangles. Top surfaces are beveled. The frame is black anodized, then lapped to create a flat at the inner edge.The membrane is then stretched over the flat and firmly adhered to the beveled ...

Specifications
Mount Type: Fixed, Adjustable
Lens Diameter: 50-100 mm
Data Sheet
Standard Frames 50.8mm
National Photocolor Corp
Add to watch list
Standard Frames 50.8mm
Standard FramesNPC Standard Pellicle Frames are stocked in 1″,2″,3″,4″,5″ and 6″ circular rings, plus 5″x7″ rectangles. Top surfaces are beveled. The frame is black anodized, then lapped to create a flat at the inner edge.The membrane is then stretched over the flat and firmly adhered ...

Specifications
Mount Type: Fixed, Adjustable
Lens Diameter: 50-100 mm
Data Sheet
Standard Frames 25.4mm
National Photocolor Corp
Add to watch list
Standard Frames 25.4mm
NPC Standard Pellicle Frames are stocked in 1″,2″,3″,4″,5″ and 6″ circular rings, plus 5″x7″ rectangles. Top surfaces are beveled. The frame is black anodized, then lapped to create a flat at the inner edge.The membrane is then stretched over the flat and firmly adhered to the beveled area. The machined aluminum rings have two ...

Specifications
Mount Type: Fixed, Adjustable
Lens Diameter: 25-50 mm
Data Sheet
E-Z Test
Richardson Electronics Ltd
Add to watch list
E-Z Test
The E-Z Test uses polarize filters to provide a simple quick method for testing lenses for stress. Simply place your lens in the unit and rotate the polarized filters so they are 90° to each other. A clear lens indicates that the lens is stress.

Specifications
Mount Type: Fixed
Lens Diameter: 1-10 mm, 10-25 mm, 25-50 mm, 50-100 mm, 100-125 mm
Data Sheet
Fixed Threaded Optic Holder 12.5 mm
Ealing Catalog
Add to watch list
Fixed Threaded Optic Holder 12.5 mm
Thin lenses or beamsplitters of half-inch, one inch, and two inch diameter can be held in these versatile Component Mounts. The optical component is secured in place by a soft-faced threaded ring. This ring can be tightened using a spanner wrench tool. Thin Lens Mounts can be supported by a standard Half-inch Mounting Post (not supplied).

Specifications
Mount Type: Fixed
Lens Diameter: 10-25 mm
Data Sheet
On FindLight marketplace you will find 5 different Fixed Lens Mounts from suppliers around the world. With just a few clicks you can compare different Fixed Lens Mounts and get accurate price quotes based on your needs and quantity required. Note that some wholesale suppliers may offer discounts for large quantities. From any product page you can directly contact any vendor within seconds.