FILTER PRODUCTS

to
to
to

Littrow Prisms

Littrow Prisms are versatile optical elements that come in various configurations, including uncoated prisms used for dispersing light into a spectrum and aluminum-coated prisms that divert the beam at a 60-degree angle without inverting or reverting the image. These prisms are commonly used in laser cavities to tune the gain of the ...

Specifications

Dimension (A - Height): 22 mm
Dimrnsion (B - Length): 37.9 mm
Dimension (C - Width): 22 mm
Material: BK7
Coating: Al+SiO2
...
Data Sheet
Tecnottica Littrow Prisms
Tecnottica Consonni
Tecnottica manufactures and distributes several kind of prisms, differentiated in according to their geometric shapes and the applications for which they are designed.

Specifications

Dimension (A - Height): custom mm
Dimrnsion (B - Length): custom mm
Dimension (C - Width): custom mm
Material: BK7, FS, UVFS, Other
Data Sheet
Littrow Dispersing Prisms (LDP)
Lambda Research Optics
Littrow prisms are retro-reflecting Brewster prisms. They are arranged to that a beam entering at the Brewster angle falls normal to the flat surface and is reflected back along the same path. They are useful in laser cavities where the wavelength of the return beam can be selected by tilting the prism slightly. In this way the gain ...

Specifications

Dimension (A - Height): 12,7 mm
Dimrnsion (B - Length): 12,7 mm
Dimension (C - Width): 19,05 mm
Material: UVFS
Data Sheet
Littrow Prisms are of the same design as Brewster prisms but cut in half vertically from the apex to the base. They are normally used in a laser cavity or prism spectrometer to select a particular wavelength. In general, the beam is incident on the hypotenuse and is reflected back from the rear surface. It exits from the hypotenuse ...

Specifications

Dimension (A - Height): 25.4 mm
Dimrnsion (B - Length): 25.4 mm
Dimension (C - Width): 25.4 mm
Material: UVFS
Data Sheet
Brewster Prisms are designed to have an apex angle such that a p-polarized ray incident at Brewster’s angle will pass through the prism parallel to the base at minimum deviation, and exit also at Brewster’s angle. In this case surface reflection losses are negligible. Brewster Prisms are often used in situations where surface ...

Specifications

Dimension (A - Height): 15 mm
Dimrnsion (B - Length): 15 mm
Dimension (C - Width): -- mm
Material: UVFS
Data Sheet
There are 5 different Littrow Prisms from suppliers and manufacturers listed in this category. In just a few clicks you can compare different Littrow Prisms with each other and get an accurate quote based on your needs and specifications. Please note that the prices of Littrow Prisms vary significantly for different products based on various factors including technical parameters, features, brand name, etc. Please contact suppliers directly to inquire about the details and accurate pricing information for any product model. Simply navigate to the product page of interest and use the orange button to directly reach out to the respective supplier with one click.

Did You know?

Littrow prisms are used in applications where a minimum deviation and a maximum dispersion of the incident beam are required. These prisms are typically made of UV fused silica and feature moderate loss for p-polarized beams. Thanks to these properties they are frequently used in laser cavities (to fine tune the laser by wavelength selection) and in spectrographs in conjunction with diffraction gratings. Because of their unique applications the accuracy of Littrow Prisms, which is defined by the precision of their angles, is an important consideration.