Zero Order Waveplate 10mm-Z-L/2-660nm

Tower Optical Corporation

OVERVIEW

Tower’s 10mm Zero order waveplates provide users with a high performance Crystal Quartz retarder with a clear aperture of 8mm. These waveplates are air spaced, having a stainless steel spacer between two crystal quartz plates that form the zero order capability. Zero order waveplates are far less sensitive to temperature variations than multi-order waveplates. Air spaced waveplates have higher thermal stability and power handling capability than contacted or cemented waveplates. There are no failures as occur with contacted waveplates coming apart. Angular alignment of the waveplates is also more accurate. Tower Optical standard 10mm waveplates are made from Laser quality Crystal Quartz and are AR coated. Each plate is AR coated on both sides. Standard retardations are ½ or ¼ wave. These waveplates are offered either unmounted with a diameter of 10mm or mounted in a 12.7mm or 25.4mm, anodized Aluminum mounting ring with an 8mm clear aperture. The standard wavelengths available are shown in the chart below. As a special feature, Tower offers the ability to supply the 10mm zero order waveplates at wavelengths within a range of 10–20nm from any of those listed on the chart. Other wavelengths are available on a custom order basis.

SPECIFICATION

Waveplate Type: Zero Order
Material: Quartz
Mounting: Mounted, Unmounted
Shape: Round
Size: 10 mm
Center Wavelength: 660 nm
Retardation: Lambda/2
Retardation Accuracy: +/- Lambda/200
Wavefront Distortion: <= Lambda/10
Surface Quality (Scratch-Dig): 10-5

Download Data Sheet

Lasers

Laser Systems

Incoherent Light Sources

Particle and Quantum Sources

Optics

Fiber Optics

Optical Systems

Opto-Mechanics

Motion Control

Non-Contact Inspection

Light Analysis

Spectral Analysis

Imaging and Vision

Zero Order Waveplate 10mm-Z-L/2-660nm

OVERVIEW

SPECIFICATION

You may also like