MSHG1550-0.5-0.3 Crystal For 1550nm SHG
Description
MgO:PPLN crystals for Second Harmonic Generation (SHG) of a laser source from 1530nm to 1620nm. Our MSHG1550-0.5 crystals are 0.5mm thick and 0.3-40mm long. The shortest lengths are highly popular for femtosecond pulses.
For high power lasers we also recommend theMSHG1550-1.0 range. All of our crystals are supplied clip-mounted, ready for use in our ovens and controller.
MSHG1550-0.5-0.3 Crystal For 1550nm SHG
Specifications |
|
|---|---|
| Crystal Type: | LiNbO3 (Lithium Niobate) |
| Phase Mathcing Type: | Not Applicable |
| Mounting: | Mounted |
| Width: | 10 mm |
| Height: | 0.5 mm |
| Length: | 40 mm |
| Flatness: | <= Lambda/4 |
| Surface Quality (Scratch-Dig): | 20-10 |
| AR Coating: | Both Sides |
Features
Multi-band AR coated
Flatness <λ/4@633nm
Parallel to ±5 minutes
Better than 70:30 mark-to-space ratio
Polished to 20-10 scratch dig
Fewer than two 100μm edge chips per facet
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United Kingdom
-
Sold by:
-
On FindLight:
since 2021
Frequently Asked Questions
The MSHG1550-0.5-0.3 crystal is used for Second Harmonic Generation (SHG) of a laser source from 1530nm to 1620nm.
The crystal is 0.5mm thick and can be 0.3-40mm long.
The shortest lengths of the crystal are highly popular for femtosecond pulses. For high power lasers, the MSHG1550-1.0 range is recommended.
Yes, all of our crystals are supplied clip-mounted and ready for use in our ovens and controller.
The crystal has a multi-band AR coating, a flatness of less than λ/4 at 633nm, and a parallelism of ±5 minutes. It is also polished to a 20-10 scratch dig and has fewer than two 100μm edge chips per facet.