Broadband Optical Modulator BOM-200
The broadband electro-optic modulator design is based on BMC’s MEMS deformable mirror technology that uses hysteresis-free electrostatic actuators to deform a continuous mirror facesheet. The device microfabrication process is well suited for the creation of high-precision optical components and is optimal for high volume production using commercial semiconductor batch processing techniques.
- Aperture Diameter: 8.5 mm
- Peak Optical Power Density: 0.1 MW/cm^2
- Wavelength Range: 550 - 20000 nm
- Transmission: 90 %
- Extinction Ratio: >= 500:1, >= 100:1
- Rise/Fall Time: 5us
- 3dB Rolloff: 100 kHz
Scanning Laser Microscopy
- High throughput in the VIS to Mid IR
- No polarization effects
- DC to 200kHz operation
- Scanning microscopy
- Laser beam intensity modulation
The Broadband Optical Modulator is a reflective diffraction grating with controllable groove depth for operation over
a broad range of wavelengths from the visible to the mid-infrared. It is capable of intensity variation by switching between an unpowered flat mirror-state and a powered
You may also like
Q-SWITCH 27MHZ, 4MM SHEAR, 6MM RA PUSH FITTINGS, METRIC MOUNTCascade Laser Corp
Q-SWITCH 27MHZ, 3MM SHEAR, BARBED FITTINGSCascade Laser Corp
Q-SWITCH 24MHZ, 4MM SHEAR, SCREW FITTINGSCascade Laser Corp
Q-SWITCH 24MHZ, 4MM SHEAR, BARBED FITTINGSCascade Laser Corp
CRYSTECH RTP Q-switchCRYSTECH Inc.
CRYSTECH DKDP Pockels CellCRYSTECH Inc.
APE Electro-Optical Modulator 1200nmApplied Physics & Electronics, Inc.
APE Electro-Optical Modulator 1030nmApplied Physics & Electronics, Inc.
APE Electro-Optical Modulator 900nmApplied Physics & Electronics, Inc.
APE Electro-Optical Modulator 690nmApplied Physics & Electronics, Inc.
APE Electro-Optical Modulator 420nmApplied Physics & Electronics, Inc.
DKDP Q-Switch Pockels CellsTHATSHIGH Photoelectric Technology Co., Ltd.