APE Electro-Optical Modulator 900nm
The A·P·E external Electro-optical Modulator (EOM) is an accessory for laser sources based on A·P·E’s long standing experience in designing optoelectronics. It is a dedicated modulator that was designed to be used in Stimulated Raman Scattering (SRS) and other applications that require an amplitude modulated signal. The external EOM can be used with most CW or modelocked lasers, or synchronously pumped OPOs in the VIS to NIR range (as for example the Levante Emerald or the 1031 nm output of the Emerald Engine). It modulates the amplitude of the beam with a fi xed frequency of either 10 MHz or 20 MHz. Modulators for different wavelengths between 420 nm and 1600 nm are available as well.
- Aperture Diameter: -- mm
- Peak Optical Power Density: 0.0004 MW/cm^2
- Wavelength Range: 900 - 1200 nm
- Transmission: 85 %
- Extinction Ratio: Not Specified
Different wavelength ranges available
10 MHz or 20 MHz fi xed modulation frequency (can be phase locked, synchronized to laser frequency: f/4 or f/8)
Resonant design for reduced RF radiation
Ideal tool for SRS imaging applications
You may also like
CRYSTECH RTP Q-switchCRYSTECH Inc.
CRYSTECH DKDP Pockels CellCRYSTECH Inc.
APE Electro-Optical Modulator 1200nmA·P·E-Applied Physics & Electronics, Inc.
APE Electro-Optical Modulator 1030nmA·P·E-Applied Physics & Electronics, Inc.
APE Electro-Optical Modulator 690nmA·P·E-Applied Physics & Electronics, Inc.
APE Electro-Optical Modulator 420nmA·P·E-Applied Physics & Electronics, Inc.
DKDP Q-Switch Pockels CellsTHATSHIGH Photoelectric Technology Co., Ltd.
Electro-Optic DevicesCASTECH INC.
Broadband Optical Modulator BOM-200Boston Micromachines Corporation
Broadband Optical Modulator BOM-115Boston Micromachines Corporation
Modulating Retro-ReflectorBoston Micromachines Corporation
Broadband Optical Modulator (BOM)Boston Micromachines Corporation