No parameters available.

EO Accessories

The PM1 Installation Stage and Pockels Cells Mounting Stand are essential components for the installation and mounting of Pockels Cells in optical systems. The PM1 Installation Stage is designed for the new PM1 series of Pockels Cells with a diameter of 25.4mm. On the other hand, the Pockels Cells Mounting Stand is specifically ...

Specifications

Adjust Angles, Tilts And Tip: ±3.5 °
Rotate Along The Z-ax: 180°
Adjusting Screw Threa: M6 × 0.25
Screw Sensitivity (: 0.5
Diameter: 25.4 mm
Data Sheet
The C-995 is a microprocessor-based control system that utilizes direct-digital-synthesis to deliver precise optical chopping rates from 4 Hz to 5000 Hz. Equipped with a large five-digit LED readout, the C-995 controller enables digital entry of the desired chopping rates from the front panel. Additionally, the C-995 is ...

Specifications

Chopping Rates: 4 to 5000 Hz
Frequency Resolution: 0.001 Hz
Data Sheet
Generation of a two-step high-voltage pulse with nanosecond rising edges. First step duration of the output high- voltage pulse is determined by trigger pulse duration. Second step amplitude of the output HV pulse is equal to the double voltage of first step. Driver can be used for ultrafast optical beam modulation and deflection, ...
Data Sheet
Generation of high-voltage quasi-rectangular pulses with nanosecond rising and falling edges. HV output duration is determined by trigger pulse duration. Driver can be used for ultrafast optical beam modulation and deflection, control of laser regenerative amplifiers and pulse pickers. Models: PCD-041 – HV pulse duration is ...
Data Sheet
QBD-series consists of several Pockels cell driver circuit boards that differ with output voltage range (up to 6.0kV bipolar) and operating scheme. QBD-series is specially designed to control Pockels cells by applying a fast switching high voltage. The modules require +24VDC power supply and pulse generator to set an operating ...
Data Sheet
QBU-series is specially designed to control Pockels cells by applying a fast switching high voltage. The modules require +24 V DC power supply and pulse generator to set an operating frequency and pulse width. An output voltage level can be programmed in working range by user either manually (through onboard configuration ...
Data Sheet
iXBlue RF Driver DR-DG-10-MO
Qubig GmbH
iXBlue designs, produces and commercializes optical modulators intended for a variety of applications including : optical telecommunications, pulsed lasers, fiber sensors, RF over fiber …
Data Sheet
iXBlue RF Driver DR-PL-10-MO
Qubig GmbH
iXBlue designs, produces and commercializes optical modulators intended for a variety of applications including : optical telecommunications, pulsed lasers, fiber sensors, RF over fiber …
Data Sheet
iXBlue RF Drivet DR-AN-10-MO
Qubig GmbH
iXBlue designs, produces and commercializes optical modulators intended for a variety of applications including : optical telecommunications, pulsed lasers, fiber sensors, RF over fiber …
Data Sheet
There are 9 different EO Accessories from suppliers and manufacturers listed in this category. In just a few clicks you can compare different EO Accessories with each other and get an accurate quote based on your needs and specifications. Please note that the prices of EO Accessories vary significantly for different products based on various factors including technical parameters, features, brand name, etc. Please contact suppliers directly to inquire about the details and accurate pricing information for any product model. Simply navigate to the product page of interest and use the orange button to directly reach out to the respective supplier with one click.