Manual Tilting Stage Metric Hole Pattern
Description
This Tilting Stage provides a controlled angular displacement of ±3.75 degrees. The stage has a pivot at one end and a tilting drive at the other. The baseplate is held in contact with the micrometer or MotorDriver head by three tension springs connecting the platforms, eliminating any backlash in the drive. The platform position of the manual stage is controlled by a precision micrometer head which reads to 0.01 mm, where one division corresponds to 20 arcsec of displacement. If motorization is required a MotorDriver or EncoderDriver can be ordered separately to replace the micrometer head in the manual stage. MotorDrivers provide remote control with a resolution of 2 arcsecs and EncoderDrivers offer full motorized control from a computer and 1 arcsec resolution.
Manual Tilting Stage Metric Hole Pattern
Specifications |
|
---|---|
Tilt Range: | -3.75-3.75deg |
Resolution (Micrometer Actuator): | 5 arcsec |
Load Capacity: | 10 kg |
Features
High resolution 1-axis tilt
Motorizable
Inch and metric versions
7.5˚ total range
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
-
Ships from:
United States
-
Sold by:
-
On FindLight:
since 2017
Frequently Asked Questions
The Tilting Stage provides a controlled angular displacement of ±3.75 degrees.
The baseplate is held in contact with the micrometer or MotorDriver head by three tension springs connecting the platforms, eliminating any backlash in the drive.
The platform position of the manual stage is controlled by a precision micrometer head which reads to 0.01 mm, where one division corresponds to 20 arcsec of displacement.
Yes, if motorization is required a MotorDriver or EncoderDriver can be ordered separately to replace the micrometer head in the manual stage.
The load capacity of the Tilting Stage is 10 kg (22 lb).