All Categories
Manual Stages

FILTER PRODUCTS

Select a category above to apply technical filters
  1. Home
  2. Motion Control
  3. Manual Stages

Page 3 - Manual Stages

Manual Tilting Stage Metric Hole Pattern
Ealing Catalog
Add to watch list
Manual Tilting Stage Metric Hole Pattern
This Tilting Stage provides a controlled angular displacement of ±3.75 degrees. The stage has a pivot at one end and a tilting drive at the other. The baseplate is held in contact with the micrometer or MotorDriver head by three tension springs connecting the platforms, eliminating any backlash in the drive. The platform ...

Specifications
Tilt Range: -3.75-3.75deg
Resolution (Micrometer Actuator): 5 arcsec
Load Capacity: 10 kg
Data Sheet
Manual Tilting Stage Inch Hole Pattern
Ealing Catalog
Add to watch list
Manual Tilting Stage Inch Hole Pattern
This Tilting Stage provides a controlled angular displacement of ±3.75 degrees. The stage has a pivot at one end and a tilting drive at the other. The baseplate is held in contact with the micrometer or MotorDriver head by three tension springs connecting the platforms, eliminating any backlash in the drive. The platform ...

Specifications
Tilt Range: -3.75-3.75deg
Resolution (Micrometer Actuator): 5 arcsec
Load Capacity: 10 kg
Data Sheet
Manual Rotary Stage Metric Hole Pattern
Ealing Catalog
Add to watch list
Manual Rotary Stage Metric Hole Pattern
The MiniMech™ Rotary Stage provides a full 360 degrees of rotation from a stage supported on radial ball bearings. Coarse and fine adjustments are available, allowing initial rotation to be carried out by hand followed by fine adjustment over a range of 6 degrees using the fine adjusting screw. A vernier scale enables the ...

Specifications
Tilt Range: 360-6deg
Resolution (Micrometer Actuator): 30 arcsec
Load Capacity: 10 kg
Data Sheet