Condor-Pro/4 Controller for Multi-Sensor CMM
The CONDOR™ product family offers a comprehensive package of controllers for all kinds of multi-sensor CMMs and applications. Whether for machine builders or retrofitters, the CONDOR™ controller family stands for an integrated one-box solution consisting of either 3 or 4 main axes, 2 secondary axes and LED driver for 20 independent, individually programmable and dimmable LED sectors. This results in fewer cable connections, compactness and plug& play installation, while still offering the highest speed, exceptional machine throughput and accurate results. 20 years of experience in metrology and some 12,000 Pantec-controlled CMMs installed worldwide mean a very high level of a secure investment, and assure you of maximum benefits.
CONDOR™ pro /4
Equipped with a fourth main axis for all machine types, CONDOR™ pro /4 is the ideal solution for complex metrology applications.
- Number Of Axes Controlled: 6
- Communication W/ PC: Ethernet, RS232
- Motor Type (Main Axis): DC-Brush
- Motor Type (Secondary Axis): DC-Brush, Brushless, Stepper
- Analog Scanning: No
- Weight: 20 kg
- Rack Mounting: 19
- Measurement Volume: unlimited
- Number Of Main Axis: 4
- Drive Power: 5 A / 60 V
- Nominal Input Power: 550 VA
- Feedback: Encoder / Tachometer
- Dimension ( L X H X D): 490 x 135 x 380 mm
PLUG AND PLAY DEVICE
The plug-and-play design of the controller gives immediate installation capability without needing any preparations. Just plug in, tune and measure. This also greatly reduces service effort.
EASY TO TUNE
The Pantec Support Tool with integrated Wizard makes machine tuning delightfully fast and easy, and ensures optimum handling. Guided processes, dynamic adaption of system parameters, and menu-guided operation result in higher operating safety. The Pantec Support Tool is easily upgradable and provides continuous performance improvement to meet evolving requirements.
WORKS WITH ANY SYSTEM, HIGHLY VERSATILE
CONDOR™ controls any kind of multi-sensor CMMs. The variety of applications is almost limitless - rotary table, probe head, scanning probe, zoom, LED ring and illumination. CONDOR™ is compatible with almost any software and drivers. It supports established touch trigger probes, laser scanning systems, motor types and many scanning and probe head interfaces.
OUTSTANDING REPEATABILITY, REPRODUCIBILITY AND HIGH SPEED
The high-end DSP technology ensures perfectly smooth machine movements and a very high sampling rate for reproducible, repeatable and accurate results at extraordinary speed. The fully digital T-Bus™ temperature monitoring, incorporated Geometric Error Compensation and sub-count interpolation for increased position resolution leave nothing to be desired.
You may also like
EAGLE-Pro/4 HP CMM ControllerPantec Engineering AG
EAGLE-Pro/4 CMM ControllerPantec Engineering AG
EAGLE-Pro/3 CMM ControllerPantec Engineering AG
EAGLE-Basic CMM ControllerPantec Engineering AG
Condor-Pro/4 Scan Controller for Multi-Sensor CMMPantec Engineering AG
Condor-Pro/3 Scan Controller for Multi-Sensor CMMsPantec Engineering AG
Condor-Pro/3 Controller for Multi-Sensor CMMsPantec Engineering AG
Condor-Basic Controller for Multi-Sensor CMMsPantec Engineering AG