Swift MultiPack-F is designed to assemble Fusion Splice On Connectors and works with any standard fusion splicer. The  combination stripper With 4 functions, stripping, cleaning, cleaving and sleeving, are in this single unit. In addition to the fibre preparation tools the Multi‐Pack F includes a visible laser source and ...

The CT30A is a high quality fibre cleaving tool for use with fusion splicers.  The CT30A is the easiest to use fibre cleaver. The cleaver blade is pushed into position, the fibre is clamped in the v-groove and the cleaving arm is lowered to initiate the cleaving action. The design of the CT30A has been optimised so that every ...

The UCL Swift CI-01 is a low cost precision cleaver that gives superb results suitable for fusion splicing. This multi action cleaver is ideal if you are working within a budget or you are looking for a back up cleaver.  

The CI-03 is the best cleaver for field technicians, it is compact, has an integrated sharps collector, an autorotating blade which gives up to 75,000 cleaves and does not require the user to adjust the blade. The CI-03 uses an oil damper system to ensure the blade contacts the fibre at a steady speed. This reduces stress to the ...

With the elimination of operator variability in scribing, coupled with the dramatic savings in consumable and labor costs, the LaserCleave™ system offers the compelling return on investment considering it’s benefits of cost savings, increased throughput and overall process improvement. From single mode to multimode and simplex ...

The fibersect rapidly removes the epoxy and fibers of all ferrules and connectors,including MPO/MTP® ferrules and single fiber connectors and ferrules. With a simple push of a button and a 1- 4 second cycle time the fibersect increases throughput, by reducing the number of  steps in the polishing process  and ...

The AUTOCLEAVER S2™ is an automatic system for precision cleaving of sensitive air-clad and microstructured fiber. It has a specially designed clamping system with air pressure controlled force regulation that enables it to clamp and hold also brittle specialty fibers that might otherwise be damaged during cleaving. It is ...

This ultra high precision cleaver is specially designed for production applications where close control of bare fiber length after cleaving is required. It senses the edge of the coating and automatically adjusts the cleave point to meet a specific bare fiber length with high precision. This length is specified by the customer at ...

The AUTOCLEAVER S2™ is an automatic system for precision cleaving of sensitive air-clad and microstructured fiber. It has a specially designed clamping system with air pressure controlled force regulation that enables it to clamp and hold also brittle specialty fibers that might otherwise be damaged during cleaving. It is ...

The AUTOCLEAVER LDA™ is an automatic system for precision cleaving of circular large diameter fibers (LDF). It is designed to provide both perpendicular and angled cleaving capability on fibers ranging from 230 up to more than 800 µm in diameter. The cleave angle is set using a micrometer screw positioner allowing ...

This fully automated optical fiber cleaver is designed for fast and flexible large diameter fiber processing in factory and laboratory environments. Easily interchangeable fiber handling parts enable high precision cleaving of different circular fibers in the range from 230 µm up to 1000 µm cladding diameter with industry ...

The AUTOCLEAVER™ is a fully automatic, ultra high-precision fiber cleaver with a typical cleave angle of less than 0.3 degrees. It is designed for industrial applications where high accuracy, reliability and a high production yield are required. A built-in microprocessor controls all parameters and settings such as fiber ...

The AUTOCLEAVER LDF-M™ is a high precision fiber cleaver designed for cleaving of standard to large diameter fibers (LDF) in production and laboratory environments. It provides outstanding cleaving performance on fibers with cladding diameters from 80 μm up to more than 600 μm. A unique and patent pending cleaving ...

The small and light weight MINICLEAVER™ is designed to provide versatile fiber cleaving capability in settings where portability and consistent cleaving results are required. It features a built-in battery and is well suited for use both in field splicing and in laboratory or production environments where available space is limited. ...

The ProCleave SD is an advanced electronic fiber cleaver for fibers up to 250 μm. The cleaver is specifically designed for use in production lines where ease-of-use, process speed and a high production yield is crucial. The cleaver is at the same time well suited for R&D environments. The ProCleave SD is utilizing an advanced ...

The ProCleave LD II is an automatic and highly advanced fiber cleaver for large diameter fibers up to 550 μm. The cleaver is specifically designed for use in production lines where ease-ofuse, process speed and a high production yield is crucial. The cleaver is at the same time well suited for R&D environments. ProCleave LD II ...

The 3SAE Liquid Clamp Cleaver II LDF, is the most advanced large diameter ber cleaver for circular and shaped bers from 125 μm to 1000 μm. It is available in two dierent models, the Liquid Clamp Cleaver II-S (LCC II-S) and Liquid Clamp Cleaver II-A (LCC II-A). The LCC II-S is designed for standard, non-angle cleaving while the LCC ...