FILTER PRODUCTS

Select a category above to apply technical filters

Page 2 - Waveform Generators and Analyzers

The Model 8530 Series Board Level Digital Delay Pulse Generator represents the latest in timing and synchronizing capabilities. The 8530 comes with four or eight independent outputs, dual trigger gate inputs and external clock reference input, making it ideal for laser system timing applications. The system can directly ...

Specifications

Channel Mode: Duty Cycle, Normal, Burst, Single Shot
Pulse Delay Range: 0-1000sec
Pulse Width Range: 0.00001-1000000ms
Resolution: 1 ns
Data Sheet
The Model 8530 Series Board Level Digital Delay Pulse Generator represents the latest in timing and synchronizing capabilities. The 8530 comes with four or eight independent outputs, dual trigger gate inputs and external clock reference input, making it ideal for laser system timing applications. The system can ...

Specifications

Channel Mode: Duty Cycle, Normal, Burst, Single Shot
Pulse Delay Range: 0-1000sec
Pulse Width Range: 0.00001-1000000ms
Resolution: 0.25 ns
Data Sheet
Our most capable current generator, the 9730 series provides users with the ability to generate highly precise current pulses, making this unit ideal for applications that require a high level of accuracy and repeatability. Advanced safety features provide user assurance.

Specifications

Channel Mode: Burst, Single Shot
Pulse Delay Range: 0-1000sec
Pulse Width Range: 0.02-1ms
Resolution: 100 ns
Data Sheet
The 9710 Current Pulse Generator is an ideal re set for airbag squib, detonator and pyrotechnics initiator testing. The instrument provides adjustable current  signals up to 25 amps. The unit comes with 2 or 4 digitally controlled load resistant independent outputs. Output pulse widths and delays are ...

Specifications

Channel Mode: Single Shot
Pulse Delay Range: 0-100sec
Pulse Width Range: 0.1-100ms
Resolution: 200 ns
Data Sheet
Our 9530 Pulse Generator provides the latest in laser timing and synchronization. Oering a unique 1U 19” rackmount package with all rear panel connections, it is well suited for integration into your rack timing and control systems.

Specifications

Channel Mode: Duty Cycle, Normal, Burst, Single Shot
Pulse Delay Range: 0-1000sec
Pulse Width Range: 0.001-0.01ms
Resolution: 0.250 ns
Data Sheet
The model 9520 series heightens the capabilities of pulse generation and digital delay to new levels. Cost effective, yet extremely capable, this instrument provides solutions to generate and synchronize multiple pulses and triggers for a wide variety of applications from simple to complex. The 9520 series ...

Specifications

Channel Mode: Duty Cycle, Burst, Single Shot
Pulse Delay Range: 0-1000sec
Pulse Width Range: 0.1-100ms
Resolution: 0.250 ns
Data Sheet
The Model 9500 Plus Series Digital Delay-Pulse Generator with 2, 4 or 8 independent outputs is designed to provide cutting edge, yet cost-eective solutions to generate and synchronize multiple pulses for a variety of applications. The delay and pulse width for each channel are independent and digitally controlled ...

Specifications

Channel Mode: Duty Cycle, Burst, Single Shot
Pulse Delay Range: 0-1000sec
Pulse Width Range: 0.00001-1000000ms
Resolution: 1 ns
Data Sheet
The Emerald 9250 series pulse generator was designed to meet the growing demand for an affordable yet high resolution system synchronizer. This precision delay generator comes standard with a 280 ppb TCXO oscillator and 5ps timing resolution for high performance in a compact packaging.

Specifications

Channel Mode: Duty Cycle, Burst, Single Shot
Pulse Delay Range: 1-4sec
Pulse Width Range: 0.000008-4000000ms
Resolution: 0.005 ns
Data Sheet
The Sapphire Plus is an upgrade to our standard Sapphire, with this enhanced version you will have better performance and higher specifications. This unit is perfect for those on a budget but looking for more precise resolution and jitter.

Specifications

Channel Mode: Duty Cycle, Burst, Single Shot
Pulse Delay Range: 0-1000sec
Pulse Width Range: 0.00001-1000000ms
Resolution: 5 ns
Data Sheet
The sapphire series is the most affordable Digital Delay Pulse Generator in our family of products. Despite its low cost, this robust model offers a full range of features, making it ideally suited for the budget sensitive user.

Specifications

Channel Mode: Duty Cycle, Normal, Burst, Single Shot
Pulse Delay Range: 0-1000sec
Pulse Width Range: 0.00001-1000000ms
Resolution: 10 ns
Data Sheet
Quantum Composers now provides board level digital delay pulse generators. The 8000 series board products retain all functionality of the standard pulse generators in an easy to integrate package. These boards provide a cost-effective method to create and synchronize multiple sequences, delayed ...

Specifications

Channel Mode: Duty Cycle, Normal, Burst, Single Shot
Pulse Delay Range: 0-1000sec
Pulse Width Range: 0.00001-1000000ms
Resolution: 1 ns
Data Sheet
The Moku: Arbitrary Waveform Generator can generate custom waveforms with up to 65.536 points at update rates of up to 1GS/s. Waveforms can be loaded from a file, or input as a piece-wise mathematical function with up to 32 segments, enabling you to generate truly arbitrary waveforms. In pulsed mode, waveforms can be output ...

Specifications

Number Of Channels: 2
Bandwidth: 300 MHz
Sampling Rate (per Channel): 1 GS/sec
Output Impedance: 50 Ohm
Waveform: Sine, Square, Ramp, Pulse, DC
Data Sheet
The Moku Waveform Generator enables users to generate two waveforms with a sampling rate of up to 250Ms/s, an analog badwidth of 300MHz, and an output voltage range of +/- 1V into a 50Ω load. Select between sine, square, ramp, pulsed or DC waveforms shapes. Modulate the phase, frequency or amplitude, or generate triggered ...

Specifications

Number Of Channels: 2
Bandwidth: 300 MHz
Sampling Rate (per Channel): 1 GS/sec
Output Impedance: 50 Ohm
Waveform: Sine, Square, Ramp, Pulse, DC
Data Sheet
The Moku Spectrum Analyzer allows users to observe input signals in the frequency domain between DC and 200MHz. View 2 channels of data simultaneously with a resolution bandwidth as low as 1Hz over minimum span of 100Hz. Together, The Moku Spectrum Analyzer and the Moku Oscilloscope allow users to quickly characterise ...

Specifications

Number Of Channels: 2
Input Impedance: 50 Ohm, 1 MOhm
Input Attenuation: 0 dB, 20 dB
Input Bandwidth (into 50 Ohm): 200 MHz
Frequency Range: 1-250MHz
Data Sheet
The Moku PID Controller features two fully configurable PID controllers with an output sampling rate of 10MHz, enabling them to be used in applications requiring both low and extremely high feedback bandwidths including temperature and laser frequency stabilization. The Moku PID Controller can be used as a ...

Specifications

Number Of Channels: 2
Input Impedance: 50 Ohm, 1 MOhm
Maximum Bandwidth: 100 KHz
Input/Output Offset Range: -1-1V
Offset Precision: 100 microV
Data Sheet
The Moku Phasemeter can be used to measure the phase with better than 6 μradian precision for input signals oscillating between 1kHz and 200MHz. The Moku Phasemeter uses a digitally implemented phase-locked loop architecture, providing exceptional dynamic range and precision far exceeding the capabilities of ...

Specifications

Input Frequency Range: 1-200MHz
Input Impedance: 50 Ohm, 1 MOhm
Frequency Set-Point Precision: 3.55 microHz
Tracking Bandwidth: 10 Hz, 40 Hz, 150 Hz, 600 Hz, 2.5 KHz, 10 KHz
Data Sheet
The Moku Oscilloscope features two 500MS/s analog input channels with 200MHz analog bandwidth, 10Vpp input voltage range, and user-configurable coupling and 50Ω/1MΩ impedance. This oscilloscope takes full advantage of the iPad\'s multi touch capabilities, enabling you to add cursors, view measurements, and adjust time ...

Specifications

Number Of Channels: 2
Input Impedance: 1 MOhm, 50 Ohm
Input Voltage Range: -5-5V
Max Sampling Rate: 500 MS/sec
Vertical Resolution @ Max Sampling Rate: 12 bit
...
Data Sheet
The Moku Lockin Amplifier is a versatile instrument with a number of operating modes, enabling you to reveal signals obscured by noise, accurately measure the phase of an incoming signal relative to an internal or external reference, or behave as a phase-sensitive detector and controller in a feedback loop. The Moku:Lab\'s fluid ...

Specifications

Input Impedance: 50 Ohm, 1 MOhm
Frequency Range: 1-200MHz
PLL Frequency Range: 2-200MHz
PLL Tracking Bandwidth: 10 KHz
Phase Range: 0-360deg
...
Data Sheet
This FIR filter builder allows designing and creating lowpass, highpass, bandpass and bandstop finite impulse response (FIR) filters with up to 14.819 coefficients at a sampling rate of 244.1 kHz. The Moku:Lab\'s fluid iPad interface allows you to quickly design your filter in both the frequency and time domains, enabling ...

Specifications

Input Offset Range: -1-1V
Input Offset Resolution: 100 microV
Display Options: Magnitude, Phase, Impulse, Step Response, Group, Phase Delay
Frequency Response: Lowpass, Highpass, Bandpass, Bandstop
Impulse Response: Rectangular, Sinc, Triangular, Gaussian, Equation, Custom
...
Data Sheet
The Moku Digital Filter Box allows you to interactively design and generate infinite impulse response filters with output sampling rates of 122 Khz and 15.625 MHz. Select between lowpass, highpass, bandpass bandstop filter shapes with up to seven fully configurable types including Butterworth, Chebyshev and ...

Specifications

Input Offset Range: 1-500mV
Input Offset Resolution: 100 microV
Output Offset Range: 1-500mV
Output Offset Resolution: 100 microV
Output Gain Range: -40-40dB
...
Data Sheet
The Moku Data Logger enables you to log data directly to an SD card for long-term measurements at rate of up to 100kS/s, where the duration is limited only by the capacity of the SD card. Data can also be acquired at up to 1MS/s by saving directly to the Moku:Lab\'s 500MB internal storage. Data saved to ...

Specifications

Input Impedance: 50 Ohm, 1 MOhm
Maximum Sampling Rate (into RAM): 1 MS/sec
Maximum Log Duration: 240 Hours
Data Sheet
The Moku Bode Analizer enables you to measure the frequency response of a system in both magnitude and phase using a swept sine output from 10mHz. Select from between 32 and 512 points per sweeps and configure setting and averaging time to balance total sweep duration and signal-to-noise ratio. 

Specifications

Frequency Range: 10000-120000Hz
Frequency Resolution: 3.55 microHz
Sweep Points: >= 512
Output Load: 50 Ohm, 1 MOhm
Input Impedance: 50 Ohm, 1 MOhm
Data Sheet