J-221 365 nm Longwave Meter
Description
The UVP J-Series UV meters are photovoltaic devices for taking accurate and repeatable readings of UV light sources in either the 365 nm or 254 nm UV range. All meters and sensors are individually serialized for traceability of calibration. Calibration is recommended every six months and is certified to meet published standards and is traceable to NIST. Calibrations are performed at Analytik Jena US West's factory.
J-221 365 nm Longwave Meter
Specifications |
|
|---|---|
| Detector Compatibility: | Other |
| Min Measurable Energy: | Not Applicable |
| Max Measurable Energy: | Not Applicable |
| Min Measurable Power: | Other |
| Max Measurable Power: | <100 W |
| Energy Monitor Accuracy: | <3% |
| Power Monitor Accuracy: | <5% |
Features
Each meter features two scales for low and high intensity readings
For remote readings, a four foot (1.2 m) cord connects the sensor to the meter
Two scales measure a wide range of intensity
An infrared filter assures accurate readings when measuring light sources producing infrared radiation
The 5X attenuation screen can be used for very high intensity lamp measurements
Meters are self-powered for maximum portability
Applications
Quality Control
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
-
Sold by:
-
On FindLight:
External Vendor
Claim UVP LLC Page to edit and add data
Frequently Asked Questions
Yes, the J-221 Longwave Meter comes with a 5X attenuation screen that can be used for very high intensity lamp measurements.
Yes, the J-221 Longwave Meter can be used to measure other types of lamps, but the meter reading will have to be adjusted as the indication of the meter depends not only on the irradiance at the sensor from the source but also on the interaction of the wavelength distribution of the light source and the meter spectral response.
Calibration for the J-221 Longwave Meter is performed at Analytik Jena US West's factory and is certified to meet published standards and is traceable to NIST.
Calibration is recommended every six months for the J-221 Longwave Meter.
The J-221 Longwave Meter can measure UV light in the 365 nm range.