Frequently Asked Questions

All detector heads are 27.4mm thick by 38.1 mm in diameter. The PH and PE series are supplied with a 180 cm long flexible cable terminated with a DB-15 "intelligent" male connector, for use with Gentec-EO Monitors.

The PH100-SI-HA-OD1-D0 presents the lowest calibration uncertainty to date, with a power calibration uncertainty of ±4.0% (420 - 980 nm), ±5.0% (981 - 1049 nm), and ±7.0% (1050 - 1080 nm).

The PH100-SI-HA-OD1-D0 is a photodiode laser power detector used for laser power detection, laser optics, spectroscopy, and metrology.

The PH100-SI-HA-OD1-D0 can measure a maximum average power of 300 mW.

The peak sensitivity of the PH100-SI-HA-OD1-D0 is 0.5 A/W @ 980 nm.

You May Also Like