WinCamD-XHR - CMOS Based Beam Profiler
OVERVIEW
CMOS based laser beam profiler system by DataRay Inc. This beam profiler can be used with a wide variety of lasers from UV to Infrared spectral range.
SPECIFICATION
- Sensor Type: CMOS
- Measurable Sources: CW
- Wavelength Range: 190 - 1350 nm
- # Pixels (Width): 2048
- # Pixels (Height): 1536
- Pixel Size (Width): 3.2 um
- Pixel Size (Height): 3.2 um
- Max Full Frame Rate: 10 Hz
- ADC: 10-bit
- Part Number: S-WCD-XHR
Applications
- CW and pulsed laser beam profiling
- Field servicing of lasers and laser-based systems
- Optical assembly & instrument alignment
- Beam wander & logging
- M² measurement with available M2DU stage
KEY FEATURES
- 355 to 1150 nm, standard CMOS detector
- 3.1 Mpixel‚ 2048 x 1536 pixels, 6.5 x 4.9 mm active area
- 3.2 μm pixels
- HyperCal™ – Dynamic Noise and Baseline Correction software (Pat. Pending)
- CTE™ – Comet Tail Elimination for λ > 900 nm (Pat. Pending)
- Port-powered USB 2.0; flexible 3 m cable, no power brick
- 14-bit ADC, 4 MB image buffer & on-board microprocessor
- Window-free sensors standard for no fringing
- 25,000:1 electronic auto-shutter, 40 μs to 1000 ms
- 1,000:1 SNR (30/60 dB Optical/Electrical)
- Pulsed laser auto-trigger & synchronization
- Isolated Pulse Triggering and Parallel capture on multiple cameras
- Field-replaceable image sensors
- M squared option – beam propagation analysis, divergence, focus