No parameters available.

Accessories

SHBC is a second harmonic bandwidth compressor designed for generating narrow-bandwidth picosecond pulses from the broad-bandwidth output of PHAROS and CARBIDE femtosecond lasers. It enables the creation of versatile optical setups using fixed-wavelength or tunable narrow-bandwidth picosecond pulses in combination with ...

Specifications

Output Wavelength: nm
Conversion Ratio: %
Output Pulse Bandwidth: cm^-1
Pulse Duration: 2-4 ps
Pump Pulse Energy: 4 mJ
...
Data Sheet
The Oria Blue offers an innovative, easy-to-use and reliable doubling unit that efficiently converts the near-IR emission of mode-locked ultrafast Ti:Sapphire lasers (typically 680–1100 nm) into the near-UV and visible spectrum (340–550 nm). Based on novel nonlinear optical technology, the Oria Blue doubler provides ...
Data Sheet
The DTS0173 Pulse Compressor and Peak-Field Booster is a compact and lightweight device that utilizes nonlinear effects from an optical fiber to enhance the peak electric field generated by an ultrafast optical source. With easy installation and alignment, this device allows for tunable pulse-width compression and spectral bandwidth ...

Specifications

Wavelength: 1035 nm
Input Peak Power (Measured At Ambient Temperature): 41.7 kW
Output Peak Power (Measured At Ambient Temperature): 100.5 kW
Pulse-width Compression Factor: >3
Weight: <0.3 kg
...
Data Sheet
PISMO pulse picker by Del Mar Photonics.  As the name implies pulse pickers are used to selectively pick off pulses from the pulse train of a femtosecond or picosecond laser. Pismo pulse picker models are available as stand-alone devices that use a Pockels cell as an ultrafast shutter.  Pismo pulse pickers operate in ...

Specifications

Output Voltage: 4-12
Pulse Width: 4
Data Sheet
The Compact High-Precision Delay Stage is a versatile and reliable tool for performing delay scans with high accuracy and speed. It enables real-time terahertz waveform measurements and offers flexible control options for position tracking and triggering.

Specifications

Delay Range:: 0-50 ps
Delay Resolution: 1 fs
Delay Accuracy: ±5 fs
Position Tracking Accuracy: 0.5 um
External Trigger Input: TTL level
Data Sheet
Swamp Optics' BOATM Pulse Compressors is a single-prism device designed to re-compress ultrashort laser pulses that have spread in time due to group-delay dispersion (GDD) when they propagate through materials.    This elegant device compensates for material dispersion over a broad range of wavelengths, ranges suitable ...

Specifications

Dispersion Range: -4000 +10,000 fs^2
Input Beam Diameter: 5 mm
Clear Aperture: 15 mm
Clear Aperture: >90 %
Damage Threshold: 5 J/cm^2 (10 ns, 1064 nm, 10 Hz)
...
Data Sheet
The Vacuum Beaming™ Assemblies allow for 4-axis manual control of the beam path under vacuum, with yaw, pitch, rotation, and position adjustments made possible through a highly stable flexure mount.   These assemblies support substrates up to 3 inches and feature a KF 50 flange type. With pressure down to 10^-6 mbar, ...

Specifications

Flange Type: KF 50
Data Sheet
SESAM (Semiconductor Saturable Absorber Mirror) mode-locked ultrafast pulsed lasers represents an important breakthrough in the development of mode-locked lasers, but a key challenge remains, that is, extending SESAM technology to the mid-infrared (MIR) region. We propose a design based on InAs/GaSb superlattice SESAM, which can ...

Specifications

Central Wavelength: 2800nm | 3500nm | 3500nm |3500nm
Absorptivity: 40% | 38% | 38% | 38%
Modulation Depth: 15% | 11.5% | 14% | 11.5%
Absorption Recovery Time: 680ps | 720ps | 7ps | 1.4ps
Saturation Fluence: 70μJ/cm² | 70μJ/cm² | 50μJ/cm² | 40μJ/cm²
Data Sheet
Fiber stretchers, also called phase shifters, offer the attractive feature to tune and modulate the path length of the light within the fiber core and so the resulting optical delay does. They are based on voltage-driven Piezo ceramics and need to be controlled with proper electronics drivers. Any type of fiber may be assembled, ...

Specifications

All Types Of Fibers: SM, MM, PM
Wavelength: From UV to IR
Fiber Elongation: 13 or 26 µm
Fiber Stretch: 2.5 or 5 µm
High Tunability Resolution: < 10 fs
...
Data Sheet
The Thorlabs Chromatis dispersion measurement system allows for precise determination of group delay dispersion (GDD) introduced by reflective and transmissive optics. No isolation table is required, only a solid work bench. Standard measurement modes include normal incidence reflection, angled reflection, mirror pairs, and ...

Specifications

Measurement Range (standard): 500 - 1100 nm
Measurement Range (optional): 1000 - 1650 nm
Group Delay Dispersion (GDD) Resolution: 5 fs^2
Data Sheet
Large-scale spintronic terahertz emitter with integrated permanent magnet for plug-and-play operation. Mounted inside a 360° rotation mount (2 Inch) for flexible adjustment of the terahertz polarization.Ideally suited for collimated-beam excitation up to 20 mm in diameter.
Data Sheet
Compact spintronic terahertz emitter with integrated permanent magnet for plug-and-play operation.Mounted inside a 360° rotation mount (1/2 Inch) for flexible adjustment of the terahertz polarization.Ideally suited for focused excitation.
Data Sheet
The \"DCM10\" is a broadband (500-850nm) dispersion compensating mirror pair designed for the compensation of the positive dispersion caused by fused silica like material. The wavelength range suits femtosecond applications using few-cycle pulses generated by hollow core fibers or filamentation. The unique pair design enables to ...
Data Sheet
Laser Quantum offers the timing stabilisation units TL-1000 and TL-1000-ASOPS as accessories to the gigajet series high-speed femtosecond oscillators and the taccor femtosecond laser. The TL-1000 can also be used for stabilisation of the gecco and venteon series of lasers. The TL-1000 allows the tight phase-lock of an oscillator ...

Specifications

Rep Rate Range: 79.68 MHz - 1.004 GHz
Timing Jitter: <60 fs
Time Resolution In ASOPS: <60 fs
Data Sheet
Laser Quantum offers the timing stabilization units TL-1000 and TL-1000-ASOPS as accessories to the gigajet series high-speed femtosecond oscillators and the femtosecond laser. The TL-1000 can also be used for stabilization of the gecco and venteon series of lasers. The TL-1000 allows the tight phase-lock of an oscillator repetition ...

Specifications

Rep Rate Range: 75 MHz - 10 GHz
Timing Jitter (taccor/helixx Models): <100 fs
Timing Jitter (venteon/gecco Models): <300 fs
Data Sheet
Femtosecond laser pulses with spectral widths approaching one octave and beyond, require specialised optical components to avoid the accumulation of phase distortions that cannot be pre-compensated for. An all-dielectric ultrabroadband beamsplitters with constant splitting ratio and balanced dispersion in transmission and reflection. ...

Specifications

Split Ratio: 50 %
Wavelength Range: 600 - 1500 nm
Data Sheet
This mirror mount accepts rectangular optics/mirrors with a height up to either 20 or 25mm (depending on the chosen version). The design allows for a direct mounting into standard 1\" mirror mounts. The slim design with no side-frame is ideally suited to build up compressor beam lines using rectangular mirrors with multi-bounces.
Data Sheet
  The \"DCM11\" is a GVD mirror pair specially designed for OPCPA compression. This mirror type covers a wide wavelength range of 650-1050 nm while offering a large dispersion of -130 fs2 /pair at the centre wavelength of 800 nm. These mirrors are specially designed to recompress the output of the venteon OPCPA after passing ...
Data Sheet
The \"DCM7\" is a ultra-broadband (600nm-1200nm) dispersion compensating mirror pair used for the compensation of positive dispersion affecting femtosecond laser pulses. The unique pair design enables to achieve a reflectivity greater than 99.9% over the whole supported spectral bandwidth next to a defined negative dispersion. These ...
Data Sheet
The \"DCM9\" is a GVD mirror shifted to the \"blue\" now covering a wavelength range of 450nm-950nm. These mirrors are specially designed to be suitable for pulse compression of femtosecond pulses generated by amplification, filamentation, OPA/OPG and others. Featuring negative GVD of -60 fs² for the mirror pair @ 700nm and are ...
Data Sheet
For steering few-cycle pulse beams, usually protected silver mirrors are the first choice and widely used, since they deliver a broadband reflectivity without dispersion problems or angle dependence at a very competitive price. A protected silver mirror that is enhanced for femtosecond applications and tested for sub-5fs pulses. ...
Data Sheet
This fix mirror mount is designed to accept 1/2 inch (12.7mm) optics where no adjustment is required but an increased stability is. The dimensions of this mount are similar to standard 1/2\" adjustable mirror mounts and can be directly used to exchange those if the degree of adjustability is not required. Specifications: Mounts ...
Data Sheet
This pair of wedge mounting adapters is designed to accept up to 4mm thick glass wedges that provide fine control of the pulse compression set up in combination with the DCM mirror range. One of the adapters can be directly screwed onto M4 threaded pedestal posts whereas the other features a M2 grid to allow a direct mounting onto ...
Data Sheet
The glass wedges pair allows for dispersion compensation, fine tuning and optimal compression in combination with dispersion compensating mirrors such as the DCM range. Glass wedge pairs The dispersion characteristics of the DCM mirrors are specially designed to work together with specific glass materials, (DCM7:Calcium Floride / ...
Data Sheet
Sources of short-wavelength radiation, such as synchrotrons or free-electron lasers, have already enabled numerous applications and will facilitate more seminal studies. On the other hand, sources of coherent extreme ultraviolet to soft x-ray radiation via high-harmonic generation (HHG) of ultrashort-pulse lasers have gained ...

Specifications

Photon Energy : 20 eV - 150 eV (300 eV upon request)
Wavelength: 8.5 nm - 60 nm (4 nm upon request)
XUV Photon Flux: up to 10^14 per second
XUV Average Power: up to 330 µW
Repetition Rate: up 10 MHz
Data Sheet
There are 42 different Accessories from suppliers and manufacturers listed in this category. In just a few clicks you can compare different Accessories with each other and get an accurate quote based on your needs and specifications. Please note that the prices of Accessories vary significantly for different products based on various factors including technical parameters, features, brand name, etc. Please contact suppliers directly to inquire about the details and accurate pricing information for any product model. Simply navigate to the product page of interest and use the orange button to directly reach out to the respective supplier with one click.