Glass Wedge mounting Adapter
Description
This pair of wedge mounting adapters is designed to accept up to 4mm thick glass wedges that provide fine control of the pulse compression set up in combination with the DCM mirror range.
One of the adapters can be directly screwed onto M4 threaded pedestal posts whereas the other features a M2 grid to allow a direct mounting onto standard compact translation stages that can be ordered optionally. The design of the mounting adapter pair allows for a minimal gap between the wedges to minimize angular dispersive effects.
Specifications:
- Mounts glass wedges up to 4mm thickness.
- No limitation in terms of wedge width, but a maximum of 35mm is recommended.
- Optimized design to allow for mounting two wedges with minimal gap between each other.
- Gentle glass clamping due to rubber sheets
- M4 thread (one adapter) for direct pedestal post mounting
- Mounting holes (M2 grid) for direct translation stage mounting (one adapter)
- Translation stage for 6.5mm travel can be ordered optional with additional adapter for pedestal
- Mounting below the translation stage.
To find out more click here
Glass Wedge mounting Adapter
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
since 2016
Frequently Asked Questions
The Glass Wedge mounting Adapter is used for fine control of pulse compression setup in combination with the DCM mirror range.
The design of the mounting adapter pair allows for a minimal gap between the wedges to minimize angular dispersive effects.
There is no limitation in terms of wedge width, but a maximum of 35mm is recommended.
The Glass Wedge mounting Adapter has an M4 thread for direct pedestal post mounting.
The Glass Wedge mounting Adapter can mount glass wedges up to 4mm thickness.