RML-1070T-500 Tunable Laser System
Description
Our RML-1070T-500 is a compact rack-mount tunable laser system delivering up to 500 mW of optical power at any specific wavelength between 1040 nm and 1100 nm with a line-width of 0.1nm out of a small single-mode optical fiber. The system includes a diode-pumped fiber laser, wavelength selection mechanism, driver and control electronics. The laser energy is delivered out of a small single mode optical fiber terminated with a collimator lens that is permanently attached to the unit and comes out of the front panel.
Laser activation is controlled with the ON and OFF switch on the front panel and the power level is adjusted by the potentiometer on the front panel. The turn-on and turn-off response time of the driver circuit is approximately 2 msec, allowing modulation of the laser output at a maximum frequency of approximately 200 Hz.
RML-1070T-500 Tunable Laser System
Specifications |
|
---|---|
Wavelength: | 1040-1100 nm |
Average Output Power: | 0.5 W |
Pulse Duration: | 00-00ns |
Beam Quality (M^2): | N/A |
Max Pulse Repetition Rate: | 0.2 kHz |
Linewidth: | 0.1 nm |
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
-
Ships from:
United States
-
Sold by:
-
On FindLight:
since 2019
Frequently Asked Questions
The linewidth of the RML-1070T-500 tunable laser system is 0.1 nm.
The RML-1070T-500 tunable laser system can be modulated at a maximum frequency of approximately 200 Hz.
The RML-1070T-500 tunable laser system delivers up to 500 mW of optical power at any specific wavelength between 1040 nm and 1100 nm.
The weight of the RML-1070T-500 tunable laser system is 4 lbs.
The RML-1070T-500 tunable laser system can be provided with other types of terminations such as FC connector or bare cleaved fiber at no additional cost. USB computer interface can also be provided. Contact the factory for additional options.