1064nm Fiber End Caps

Fiber end caps performance for a range of applications, including high power fiber laser, collimator’s and sealing PCF. Fiber ends caps are created by fusion splicing or laser fusing short lengths of material to the fiber end face.

Fiber ends caps are required for a number of applications including the creation of collimator’s, to allow expansion of high power fiber laser beams to reduce the power density at the air/silica interface and to protect structured fibers against environmental ingress. Laser processing allows the large core fibers to be cleaved, free of the hackle and chips observed with mechanical scribing techniques, prior to the splicing operation. Following the splicing operation, the end caps can be laser cleaved to the final protrusion (length), angle, and orientation (i.e. stress rods) specifications.

If you do not see a standard Fiber End Caps that meets your needs, we welcome the opportunity to review your desired specification and quote a custom Fiber End Caps. Requests for custom fiber pigtails, different wavelengths and handling power of operation or other specific needs will be readily addressed.