M-Series 90-Watt Flash Lamp Configuration Laser Marking System
Description
M-Series 90-Watt Flash Lamp Configuration Laser Marking System
Specifications |
|
|---|---|
| Work Area X: | 180 mm |
| Work Area Y: | 180 mm |
| Beam Delivery: | Galvo |
| Laser Source: | CO2, Fiber, DPSS (Nd:YAG) |
| Laser Output Power: | 90 W |
| Laser Wavelength: | 1064 nm (IR) |
| Marking Speed: | -- mm/sec |
| Voltage Requirement: | 110V - 60Hz, 230V - 50Hz, 240V - 50Hz |
| Materials: | Stainless Steel, Steel/Iron, Steel Alloy, Aluminum, Anodized Aluminum, Brass, Copper, Gold, Silver, Nickel, Titanium, Platinum |
| Air Assist: | Included |
| Fume Extraction Unit: | Included |
| Safety Enclosure: | Included |
Features
- High Performance 90 Watt Nd:YAG laser
- Wavelength: 1064nm
- Mode Structure: TEM00 and Multimode
- Single linear Krypton lamp
- DC switching Power supply
- 2- 8 x Variable Beam Expander
- Water-cooled primary and secondary systems
- Electrical Supply three phase
- System controller including an RF switch driver creating pulsed and CW modes
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United Kingdom
-
Sold by:
-
On FindLight:
External Vendor
Claim Thinklaser Page to edit and add data
Frequently Asked Questions
No, the extraction unit is not included as part of the system, but the enclosure is fitted with extraction ducting that can be connected to an external extraction system.
Yes, the unit is free standing with jacking feet to enable it to be easily positioned and levelled at its manufacturing location.
The system comprises of a fully integrated Laser and Class-1 enclosure within a freestanding chassis, and the laser work-site safety enclosure is equipped with a single opening access door, a viewing window manufactured from filtered safety acrylic, and interlocks for operational safety.
The internal dimensions of the laser work-site safety enclosure are 500 x 500 mm, but larger process areas are available upon request.
The marking medium can be either CO2 or Nd:YAG.