Planar 2D Inspection System
The Planar system has been specially designed for use in the sheet metal industry for quality control and reverse engineering applications. They can be used for very quickly measuring or reverse engineering flat parts which have been manufactured on laser, plasma and water jet cutting systems as well as punched and some stamped parts. We have been supplying the Planar system to the sheet metal industry for over five years during which time we have consulted with many major manufacturers to fully understand the requirements expected from our measuring system and integrating these into the Planar.
- Application: PIV
- Imaging Speed: -- fps
- Field Of View (FOV): -- cm^2
Does not require any special jigs or fixtures to hold the part.
Does not require any pre-programming to create an inspection program.
Does not require DXF flat patterns of the parts. Our software can load in the 3D solid model directly and flatten it in memory to create the nominal 2D shape of the blank. Your preferred bend allowances and tooling can be defined.
Does not require a specialised metrology room. The machine is resistant to changes in temperature and can be retrimmed in seconds.
Does not require care to be taken when handling the glass surface. Scratches on the glass measuring surface do not affect the accuracy of the machine. Furthermore the glass is readily available from most glass suppliers.
Does not require constant recalibration. The Planar machine does not have any precision moving parts to wear so there is nothing to recalibrate.
Claim The Sempre Group Ltd Page to edit and add data