VCPROBE-NIR-STG-1
Description
VCProbe-NIR-STG is ideal to measure small aperture NIR sources and provides an efficient measurement solution for near-infrared sources such as LEDs and lasers. This system allows a full map within a ±70° viewing angle cone and an excellent angular resolution, with a working distance at 4mm permitting
non-contact measurements. Recommended for 2.5 mm exit pupil emitters.
DXY +/- 1 mm allowance for repeatability better than 1% against position for easy online positioning. The VCProbe-NIR-STG is calibrated at a wavelength of 940 nm and allows high speed and accurate measurements for applications on R&D as well as mass production/QC. Should you need a similar system for a special project or mass production, we can build a system meeting your requirements.
VCPROBE-NIR-STG-1
Specifications |
|
|---|---|
| Camera Type: | Industrial, Scientific |
| Array Type: | Not Specified |
| Spectral Band: | 1-0.94um |
| # Pixels (Height): | 2801 |
| # Pixels (Width): | 2801 |
| Pixel Pitch: | -- um |
| Array Cooling: | Cooled |
Features
Wavelength calibrated at 940nm
Applications
Facial recognition
R&D and mass production/QC
3D sensing & Imaging
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
France
-
Sold by:
-
On FindLight:
External Vendor
Claim Eldim Page to edit and add data
Frequently Asked Questions
Yes, if you need a similar system for a special project or mass production, we can build a system meeting your requirements.
The VCProbe-NIR-STG is used to measure small aperture NIR sources such as LEDs and lasers.
The VCProbe-NIR-STG allows a full map within a ±70° viewing angle cone.
The VCProbe-NIR-STG is calibrated at a wavelength of 940 nm.
The working distance of the VCProbe-NIR-STG is 4mm, allowing for non-contact measurements.