Optronis CL600x2 M/C CMOS High Speed Camera
OVERVIEW
The CL600x2 M/C camera is equipped with a 1.3 megapixel large LUPA1300 sensor from On-Semi. The camera is suitable for fast measuring tasks in 2D or 3D. The camera offers many winning features which enable the camera to be used flexibly on different measuring tasks. One special feature is the increased image rate in the X and Y sensor orientation. The CL600x2 cameras are specified to EMVA1288 and tested for consistent image quality.
SPECIFICATION
- Sensor Type: CMOS
- # Pixels (Width): 1280
- # Pixels (Height): 1024
- Pixel Size (Square): 196 um
- Peak Quantum Efficiency: - %
- Full Frame Rate: 500 fps
- Bit Depth: 10 bit
- Synchronization: internal, external
- Dimensions: 56 mm x 56 mm x 44 mm
- Synchronization Level: TTL
- Conformity: CE, RoHS
- Image Sensor: Progressive Scan CMOS
- Dynamic: 60 dB (90 dB optical) dB
- Interface: CameraLink (Base-Medium-Full)
- Scope Of Delivery: Camera CL600x2, power supply, manual and CamSetup sofware for windows
- Exposure Time: >=1 µs
- Frequency: 85 MHz
- Active Area: 17.92 x 14.34 mm
- Lens Mount: Nikon F-Moun (optional C-Mount)
- Sensor Diagonal Dimension: 22.95 mm
- Weight: 250 g
- Sensitivity: 25 V/lux*s
- Operating Temperature: 0... 40 °C
- Shutter: Global
- Humidity: <80 % relative, non-condensed
Applications
KEY FEATURES
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform CL series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.
C-Mount
For microscopy applications or for optimal adjustment of the C-mount format to the ROI (Region of Interest) of the image sensor. C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
F-Mount/FMG-Mount
With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
M42x1 Mount
Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Ease of use
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform CL series, Optronis offers high-speed cameras with CameraLink connection which are easy to operate and deliver great performance.
EMVA 1288
Simple comparability via tested, characteristic camera features
CameraLink
CameraLink MDR-26 connectors for Base (CL300x2) and Full (CL600x2) CameraLink configuration
Start-up and Factory mode
Up to 8 user-specific and 10 pre-set operating modes available
Look-Up Table
10 bit to 8 bit look-up table
Edge and Level trigger modes
Triggering on a rising/falling edge or input level
XY speed increase
Increasing the image rate by reducing the image format in the X and Y orientation
Very high light sensitivity
Up to 12,000 ISO/ASA (SNR noise 10, gain 1) high light sensitivity