Matrox RadientPro CL
Description
For low-latency and deterministic acquisition, Camera Link provides a scalable and proven solution for vision applications. From cost-sensitive, low data-rate applications to mainstream applications including color and right up to maximum-bandwidth applications, Camera Link is an excellent fit. The use of the mini Camera Link connector (HDR) on the Matrox RadientPro CL facilitates higher-density multi-camera system designs by enabling two Base or one Full mode Camera Link interface with triggering and general purpose I/O in a single slot. The single-Full Matrox RadientPro CL model supports the latest area- and line-scan cameras up to the Camera Link Full and 80-bit modes at 85 MHz. When interfaced to PoCL-enabled cameras, overall cabling complexity is reduced, eliminating the need for bulky and costly external camera power supplies.
Matrox RadientPro CL
Specifications |
|
|---|---|
| Interface: | Camera Link |
| Number Of Channels: | Up to 4 |
Features
Capture images at the highest Camera Link rates with support for the Full and 80-bit modes at up to 85MHz (single-Full model)
Eliminate lost pixels through a PCIe® 2.0 x8 host interface and ample on-board buffering
Reduce cabling and eliminate power supplies by way of Power over Camera Link (PoCL) support
Offload and accelerate image processing to free and assist the host CPU using an Altera® Stratix® V FPGA
Simplify the development of custom on-board image processing using the optional Matrox FPGA Development Kit (FDK)
Reduce development and validation costs through a managed lifecycle offering consistent long term availability
Implement image capture with ease and confidence using Matrox Imaging Library (MIL) application development toolkit
Maintain flexibility and choice by way of 64-bit Windows® 7/10 and Linux®
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
United States
-
Sold by:
-
On FindLight:
External Vendor
Claim AIA Page to edit and add data
Frequently Asked Questions
Yes, the Matrox RadientPro CL can be used for custom on-board image processing using the optional Matrox FPGA Development Kit (FDK).
PoCL support reduces cabling and eliminates power supplies by allowing cameras to be powered through the Camera Link cable.
The Matrox RadientPro CL is used for low-latency and deterministic acquisition in vision applications.
The Matrox RadientPro CL is compatible with 64-bit Windows 7/10 and Linux.
The Matrox RadientPro CL supports the latest area- and line-scan cameras up to the Camera Link Full and 80-bit modes at 85 MHz.