In-Line Isolator 1550nm 0.5~20W
Description
The isolator is used to deliver the light in one direction with low loss, higher isolation and good ER, low cost.
And short lead time is provided.
Please just feel free to drop an email to ana.t@optizonetech.com if you need a pricing.
In-Line Isolator 1550nm 0.5~20W
Specifications |
|
|---|---|
| Type Of The Device: | Isolator |
| Operating Wavelength: | 1310/1550/1650 nm |
| Max Power: | 20 W |
| Min Isolation: | 28 dB |
| Typ. Peak Isolation For Dual Stage: | 58 dB |
| Min. Extinction Ratio For F Type: | 25 dB |
| Min. Extinction Ratio For B Type: | 22 dB |
| Fiber Type: | SM, PM or LMA NA |
| Package Size: | 5.5*35mm or 80*12*10mm mm |
| Min. Isolation For Dual Stage: | 48 dB |
| Typ. Peak Isolation For Single Stage: | 42 dB |
For pricing, technical or any other questions please contact the supplier
- No registration required
- No markups, no fees
- Direct contact with supplier
Contact Supplier
How to order?
-
Ships from:
China
-
Sold by:
-
On FindLight:
since 2016
Frequently Asked Questions
The isolator is used to deliver light in one direction with low loss, higher isolation, good ER, and low cost.
The typical peak isolation of the isolator is 57/55 dB.
The maximum optical power for CW is 20W.
The operating temperature range for the isolator is -40 to +85℃.
The ordering information for the isolator includes wavelength, power level, connector type on port 1 and 2, fiber jacket on port 1 and 2, stage, PMD, and fiber length.