All Categories
Optical Networking

FILTER PRODUCTS

Select a category above to apply technical filters
  1. Home
  2. Fiber Optics
  3. Optical Networking

Page 2 - Optical Networking Equipment

Ascentta CWDM Module Multi-channel (Ask for Mini Pkg.)
Ascentta
Add to watch list
Ascentta CWDM Module Multi-channel (Ask for Mini Pkg.)
The CWDM Wavelength Division Multiplexer by Ascentta, Inc. is a high-performance optical device that allows for the simultaneous transmission of multiple optical signals over a single fiber optic cable. It employs Coarse Wavelength Division Multiplexing (CWDM) technology to combine and separate wavelengths in the 1471nm to 1611nm ...

Specifications
Operating Wavelength: 1471-1611 nm
Operating Bandwidth: 13 nm
Isolation (min): 30 dB
Max Power Handling: 0.3 W
Polarization Maintaining: Yes
...
Data Sheet
980-1550nm Polarization Maintaining Filter WDM T1550/R980
DK Photonics
Add to watch list
980-1550nm Polarization Maintaining Filter WDM T1550/R980
The Polarization Maintaining Filter WDM multiplexes PM signals and maintains the output polarization with high extinction ratio using advanced micro-optic filter technology.   All input and output fibers are polarization maintaining. It utilizes advanced filter technology to yield wide-band, low insertion loss, high ...

Specifications
Operating Wavelength: 1520~1580 nm
Operating Bandwidth: -- nm
Isolation (min): 25 dB
Max Power Handling: 0.3,0.7,1,2,3,10 W
Polarization Maintaining: Yes
Data Sheet
980-1064nm Polarization Maintaining Fused WDM
DK Photonics
Add to watch list
980-1064nm Polarization Maintaining Fused WDM
DK Photonics uses unique fusing technique and polarization maintaining fiber to build the 980/106 nm polarization maintaining fused WDM. It features low excess loss, small size and high polarization extinction ratio. PM fused WDM is widely used for fiber laser, optical sensors and optical gyro.  This product can also be ...

Specifications
Operating Wavelength: 980-1064 nm
Operating Bandwidth: ±5 nm
Isolation (min): 13 dB
Max Power Handling: 2 5 10 20 W
Polarization Maintaining: Yes
Data Sheet
Single Mode 980nm Wavelength Division Multiplexers series
GKER LASER TECHNOLOGY CO.,LTD.
Add to watch list
Single Mode 980nm Wavelength Division Multiplexers series
Single Mode 980nm Wavelength Division Multiplexers series Operating wavelength 980nm & 1550nm; 980nm & 1060nm or specify

Specifications
Operating Wavelength: 980/1310/1480 nm
Operating Bandwidth: +- 15 nm
Isolation (min): 20 dB
Max Power Handling: 0.5 W
Polarization Maintaining: No
Data Sheet
PLC Splitter (Planar Lightwave Circuit Splitter) PON Splitter
Wuhan Yilut technology Co Ltd
Add to watch list
PLC Splitter (Planar Lightwave Circuit Splitter) PON Splitter
Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power ...
Data Sheet
Fiber Optic Switches FOS-1000-2
OZ Optics
Add to watch list
Fiber Optic Switches FOS-1000-2
The Rack Mount Fiber Optic Switch (FOS-1000-2) from OZ Optics is a turnkey, rack mountable optical switch with built-in electronics and a color touch screen. It is available in a 1x4 to 1x36 configuration and can be customized with two independent optical switches in one rack mount. The standard unit is equipped with single-mode ...

Specifications
Number Of Ports: 16-36
Wavelength Range: 1250-1670nm
Insertion Loss (typical): 1 dB
Return Loss: 55 dB
Fiber Type: 9/125 μm
...
Data Sheet
Optical Delay Lines with Sub-Picosecond Resolution
OZ Optics
Add to watch list
Optical Delay Lines with Sub-Picosecond Resolution
The Optical Delay Lines (ODL) provide precise control over the delay time of light signals. They consist of input and output fiber collimators that project the light into free space and collect it back into a fiber. The delay time can be controlled by adjusting the separation between the input and output optics or by reflecting the ...

Specifications
Travel Range: 50 mm
Resolution: 635 um
Delay Range: 167 psec
Delay Resolution: 2 psec
Return Loss: 60 dB
...
Data Sheet
Xionghua Photonics Fiber Optic Switches 1X16
Xionghua Photonics
Add to watch list
Xionghua Photonics Fiber Optic Switches 1X16
XH-OSW-1X16 optical switch is an optical path control device, which has the role of controlling the optical path and converting the optical path. It has an important role in optical communication applications.    The optical switch is mainly used in optical transmission system for multiple optical monitoring, LAN ...

Specifications
Number Of Ports: 1-16
Wavelength Range: 1260-1650nm
Insertion Loss (typical): 1 dB
Return Loss: 50 dB
Connector: FC, LC, SC, ST
...
Data Sheet
32X32 Matrix Optical Switch | Xionghua Photonics
Xionghua Photonics
Add to watch list
32X32 Matrix Optical Switch | Xionghua Photonics
XH-FSW-32X32 Matrix optical switch is a product that uses optical switches to realize optical path conversion. The device provides serial port RS-232 , Ethernet RJ45 interface, through the TCP / IP protocol connection to send commands to control optical path switching, and finally realize 32 (input) X 32 (output) ...

Specifications
Number Of Ports: 1-256
Wavelength Range: 1260-1650nm
Insertion Loss (typical): 1.2 dB
Return Loss: 50 dB
Fiber Type: 9/125 um
...
Data Sheet
MXN MEMS Matrix Optical Switch
Xionghua Photonics
Add to watch list
MXN MEMS Matrix Optical Switch
XH-OSW-MXN MEMS Matrix optical switch module is a kind of optical control equipment, which can be interlinked between multi-group input port and multi-group output port, it has the advantages of small size, high switching speed, high reliability and good environmental performance. It is mainly used in optical communication for ...

Specifications
Number Of Ports: 1-256
Wavelength Range: 1260-1650nm
Insertion Loss (typical): 2.1 dB
Return Loss: 50 dB
Luminous Power: ≤500 mW
...
Data Sheet
1X2 Optical Switch
Xionghua Photonics
Add to watch list
1X2 Optical Switch
XH-OSW-1X2 optical switch is an optical path control device with the function of controlling the optical path and converting the optical path; it can realize 2 optical signal inputs and select the signal output of one of them (supporting bidirectional use). It has an important role in optical communication applications. Optical ...

Specifications
Number Of Ports: 1-2
Wavelength Range: 1260-1650nm
Insertion Loss (typical): 0.5 dB
Return Loss: 50 dB
Transmission Power: ≤ 500 mW
...
Data Sheet
2X2F Optical Switch
Xionghua Photonics
Add to watch list
2X2F Optical Switch
XH-OSW-2X2F optical switch is a kind of optical path control device, which has the function of controlling the optical path and converting the optical path; it can realize the two-way direct and cross function of the optical path. It plays an important role in optical communication applications. Optical switches are mainly used ...

Specifications
Number Of Ports: 2-2
Wavelength Range: 1260-1650nm
Insertion Loss (typical): 0.5 dB
Return Loss: 50 dB
Repeatability (dB): ≤ ±0.02
...
Data Sheet
Wavelength Division Multiplexers
OZ Optics
Add to watch list
Wavelength Division Multiplexers
OZ Optics produces a range of Wavelength Division Multiplexers (WDMs) for telecom and non-telecom applications. These devices combine light of different wavelengths into a single fiber using dichroic filters, making them ideal for applications such as confocal microscopy, white light imaging, full-color holography, and more. OZ ...

Specifications
Operating Wavelength: 1650 nm
Operating Bandwidth: -- nm
Isolation (min): -- dB
Max Power Handling: 0.5 W
Polarization Maintaining: Yes
...
Data Sheet
SX51-01 Optical Subsystem
Inneos
Add to watch list
SX51-01 Optical Subsystem
The SX51-01 is an optical subsystem with bi-directional capabilities. The subsystems are available as either the transmitter or receiver subassembly supporting up to 14 Gbps using four video- or data-lanes (4 x 3.5 Gbps) along with a simultaneous bi-directional 5 Mbps data and communication channel, all on just one multimode ...

Specifications
Signaling Rate Per Lane (Transmitter): 3.5 Gb/s
Signaling Rate Per Lane (Receiver): 3.5 Gb/s
Lane Center Wavelength: 860 nm
Data Sheet
JumboSwitch® TC3847-1: Compact 4-Channel RS232/422/485 Serial Server for Ethernet/IP Networks
TC Communications
Add to watch list
JumboSwitch® TC3847-1: Compact 4-Channel RS232/422/485 Serial Server for Ethernet/IP Networks
The JumboSwitch® TC3847-1 is a compact and easy-to-configure 4-channel RS232/422/485 serial server that enables the transport of serial data over existing Layer 2/Layer 3 Ethernet networks. It supports various serial protocols, including MicroLok®, Genisys, Modbus, and DNP 3, and features RS-232 handshaking (CTS/RTS) for optimal data ...

Specifications
Operating Wavelength: -- nm
Operating Bandwidth: -- nm
Isolation (min): -- dB
Max Power Handling: -- W
Polarization Maintaining: Yes
...
Data Sheet
RS232-422-485 2&4 Wire Bi-Dir Transceiver
Blue Helix Ltd
Add to watch list
RS232-422-485 2&4 Wire Bi-Dir Transceiver
The RS232/422/485 2&4 Wire Bi-Dir Transceiver is a high-performance data transmission device that supports three types of serial communication standards: RS232, RS422, and RS485.   This device is designed for bidirectional data transmission and features built-in surge protection for reliable data transmission over ...

Specifications
Signaling Rate Per Lane (Transmitter): -- Gb/s
Signaling Rate Per Lane (Receiver): -- Gb/s
Lane Center Wavelength: 1550 nm
Manufacturer: ComNet
Interface: RS232/422/485
Data Sheet
ComNet FDC10RS1A Bi-Directional Contact Closure Transceiver
Blue Helix Ltd
Add to watch list
ComNet FDC10RS1A Bi-Directional Contact Closure Transceiver
The ComNet FDC10RS1A Bi-Directional Contact Closure Transceiver is a reliable and high-performance device designed for industrial use. It allows for bi-directional transmission of contact closure signals over fiber optic cables, providing a cost-effective and secure solution for remote monitoring and control applications.

Specifications
Signaling Rate Per Lane (Transmitter): -- Gb/s
Signaling Rate Per Lane (Receiver): -- Gb/s
Lane Center Wavelength: 1550 nm
Interface: 1 x contact closure input, 1 x contact closure output
Transmission Distance: Up to 20 km
...
Data Sheet
Optical Transmitter for CATV and SAT TV Signals ES28XL
BKtel Photonics
Add to watch list
Optical Transmitter for CATV and SAT TV Signals ES28XL
Our optical transmitters are state-of-the-art devices designed to convert multichannel CATV signals, including AM-VSB, FM, and QAM signals, into optical signals for transmission over long distances. They can also handle additional SAT-IF signals for RF video overlay.

Specifications
Signaling Rate Per Lane (Transmitter): -- Gb/s
Signaling Rate Per Lane (Receiver): -- Gb/s
Lane Center Wavelength: 1550 nm
RF Bandwidth: Up to 2.8 GHz
Reach: > 100 km
Data Sheet
Optical Transmitter for CATV and SAT TV Signals ESxE12XL
BKtel Photonics
Add to watch list
Optical Transmitter for CATV and SAT TV Signals ESxE12XL
Our optical transmitters are state-of-the-art devices designed to convert multichannel CATV signals, including AM-VSB, FM, and QAM signals, into optical signals for transmission over long distances. They can also handle additional SAT-IF signals for RF video overlay.

Specifications
Signaling Rate Per Lane (Transmitter): -- Gb/s
Signaling Rate Per Lane (Receiver): -- Gb/s
Lane Center Wavelength: 1550 nm
RF Bandwidth: up to 2.8 GHz
Data Sheet
2G6 Series Optical Transmitter for CATV and SAT TV Signals
BKtel Photonics
Add to watch list
2G6 Series Optical Transmitter for CATV and SAT TV Signals
The Optical Transmitter is a state-of-the-art device that converts multichannel CATV signals, including AM-VSB, FM, and QAM signals, and additional SAT-IF signals for RF Video Overlay into optical signals for high-quality transmission in point-to-multipoint networks. It is available in three different types: BK Series, 2G6 Series, ...

Specifications
Signaling Rate Per Lane (Transmitter): -- Gb/s
Signaling Rate Per Lane (Receiver): -- Gb/s
Lane Center Wavelength: 1550 nm
RF Bandwidth: Up to 2.8 GHz
Reach: > 100 km
Data Sheet
BK Series Optical Transmitters for CATV and SAT TV Signals
BKtel Photonics
Add to watch list
BK Series Optical Transmitters for CATV and SAT TV Signals
These optical transmitters offer electrical to optical conversion for multichannel CATV signals, including AM-VSB, FM, and QAM signals, and additional SAT-IF signals for RF Video Overlay.     They are based on state-of-the-art LiNbO3-modulator-technology and offer excellent transmission performance in ...

Specifications
Signaling Rate Per Lane (Transmitter): -- Gb/s
Signaling Rate Per Lane (Receiver): -- Gb/s
Lane Center Wavelength: 1550 nm
RF Bandwidth: Up to 2.8 GHz
Transmission Performance: Up to 10 km
Data Sheet
ES10XL Optical Transmitter for CATV SAT TV and FTTx Networks
BKtel Photonics
Add to watch list
ES10XL Optical Transmitter for CATV SAT TV and FTTx Networks
he BKtel Optical Transmitters offer electrical to optical conversion for multichannel CATV signals, including AM-VSB, FM and QAM signals, and additional SAT-IF signals for RF Video Overlay.    These transmitters are optimized for large scale FTTx and HFC networks, with excellent transmission performance in ...

Specifications
Signaling Rate Per Lane (Transmitter): -- Gb/s
Signaling Rate Per Lane (Receiver): -- Gb/s
Lane Center Wavelength: -- nm
RF Bandwidth: Up to 2.8 GHz
Reach: > 40 km
Data Sheet
Antronix L-Band Optical Transmitters and Receivers for Satellite Communication
Antronix Inc
Add to watch list
Antronix L-Band Optical Transmitters and Receivers for Satellite Communication
Description: Antronix's L-Band Optical Transmitters and Optical Receivers are designed specifically for satellite communication and offer high performance and multiple configurations for the widest range of needs and applications.     These products enable reliable transmission and reception of satellite signals ...

Specifications
Signaling Rate Per Lane (Transmitter): -- Gb/s
Signaling Rate Per Lane (Receiver): -- Gb/s
Lane Center Wavelength: -- nm
Frequency Range: 950-2150 MHz
Optical Output Power: 7 dBm
...
Data Sheet
Antronix High Power Optical Transmitter for Headend
Antronix Inc
Add to watch list
Antronix High Power Optical Transmitter for Headend
The Antronix High Power Optical Transmitter for Headend is a cutting-edge device that provides limitless flexibility for broadcast and narrowcast services.     It is designed to deliver high-quality audio and video signals over long distances, making it ideal for use in large-scale broadcasting operations.

Specifications
Signaling Rate Per Lane (Transmitter): -- Gb/s
Signaling Rate Per Lane (Receiver): -- Gb/s
Lane Center Wavelength: -- nm
Frequency Range: 47-1000 MHz
Optical Output Power: 18-20 dBm
...
Data Sheet
xionghua photonics 1X8 Rack Mount Optical Switch
Xionghua Photonics
Add to watch list
xionghua photonics 1X8 Rack Mount Optical Switch
XH-FSW-1X8-U rackmount optical switch is a kind of optical path control equipment, which can control optical path manually, proximity and remote via keypad, serial communication and Ethernet communication. The FSW-1XN-U rackmount optical switch is a kind of optical path control equipment, which can control optical path switching ...

Specifications
Number Of Ports: 1-8
Wavelength Range: 1260-1650nm
Insertion Loss (typical): 1.2 dB
Return Loss: 50 dB
Fiber Type: 9/125 um
...
Data Sheet