FILTER PRODUCTS

Select a category above to apply technical filters

Page 2 - Fiber Test and Measurement Tools

Scepter™ is PC controlled for consistent and Telcordia compliant mass polishing of optical connectors and bare fiber. Technicians are prompted though each process step via the user friendly interface. Various polishing procedures are easily programmed for all connector types and surface finishes. Scepter™ polishing ...

Specifications

Fiber Diameter Range: 1-1um
Objects Polished: Fiber Connectors
Inspection Options: Real-Time Polishing Inspection, In-Line Surface Inspection
Data Sheet
NOVA™'s flexible processing platform allows it to be configured for polishing waveguides, optical chips, PLCs and fiber arrays.  Polished endface angles can be varied from 0 to 50 degrees using either manual or automated workholder stages.  NOVA™'s component mounting plate is adjustable for varying edge widths ...

Specifications

Fiber Diameter Range: 1-1um
Objects Polished: Fiber Connectors, Waveguides, Bare Fiber
Inspection Options: Real-Time Polishing Inspection, Video Signal
Data Sheet
Fiber stretchers, also called phase shifters, offer the attractive feature to tune and modulate the path length of the light within the fiber core and so the resulting optical delay does. They are based on voltage-driven Piezo ceramics and need to be controlled with proper electronics drivers. Any type of fiber may be assembled, ...

Specifications

Operational Wavelengths: 1310-1550nm
Fiber Stretch: 20 um/Volt
Optical Path Displacement: 3 um/Volt
Time Delay: 0.5 ps/Volt
Almost All Fibers: SM, MM, PM
...
Data Sheet
Techwin Polarization Extinction Ratio Meter PER-M500 is used to detect the polarization extinction ratio (PER) of polarization-maintaining devices, the degree of polarization of light sources, the extinction ratio of polarization-maintaining fibers and other polarization-maintaining devices, it is a new generation of ...

Specifications

Wavelength Range: 840-1630nm
Extinction Ratio Range: 0-40dB
Dynamic Range: 50 dB
Extinction Ratio Resolution: 0.001 dB
Data Sheet
MTTplus-410+ Fiber Optics Module
Agizer Ltd
The MTTplus-410+ Fiber Optics test module for the VeEX® MTTplus platform now has up to 500,000 data points with 3 cm resolution. The MTTplus-410+ supports a full range of test functions including OTDR, OPM, Light Source and VFL. GPS coordinates and images can be embedded into the OTDR sor files and PDF test report provided the ...
Data Sheet
RXT-4100+ Fiber Optics Test Module
Agizer Ltd
The RXT-4100+ Fiber Optics test module is the world’s first field portable OTDR to offer up to 500,000 data points with 3 cm resolution. The RXT-4100/4100+ OTDR modules feature a range of Optical test functions including OTDR, OPM, Light Source and VFL. Multi-protocol OTN, SDH/SONET, Ethernet, Fibre Channel and Synchronous ...
Data Sheet
OPX-BOXe Rugged Pocket-Sized Mini OTDR
Agizer Ltd
The OPX-BOXe is an ultra-compact, OTDR designed to operate remotely using Fiberizer® software. The unit can be controlled via WiFi, Bluetooth or USB from Windows, iOS, Linux or Android devices. Fiberizer® software for Windows® Desktop, Android™, and/or Apple® mobile devices is available to assist in data ...
Data Sheet
The FGC-P Fiber Coating Geometry System is the fast, reliable solution for measuring the geometry characteristics of optical fiber coatings. It provides a direct measurement of fiber coating geometry parameters including: coating diameter, coating non-circularity and coating-cladding concentricity. The FGC-P can handle fibers with a ...

Specifications

Accepted Fiber Diameter: 100-260um
Coating Diameter: 100 - 260 µm
Coating Non-circularity: <0.8%
Coating-cladding Concentricity: <0.8%
Data Sheet
The FGC-GA is the all-in-one solution for precision measurements of the geometry of the widest range of optical fibers, V-groove arrays and ribbon connectors. With one unit, users can completely characterize V-groove block geometry, core-to-core pitch and core X & Y offset of multifiber arrays up to 15mm in width. With a huge ...

Specifications

Accepted Fiber Diameter: 10-1000um
V-groove Array Measurement: 1200µm FOV
Data Sheet
The FGC fiber geometry systems use the video grey scale technique (RTM method) to provide fast, automated core/cladding geometry measurements. Measures up to 1000µm nominal cladding diameter. Can measure special fiber e.g. Bend insensitive, octagonal etc. Darkfield illumination gives clear view of the fiber endface. Standards ...

Specifications

Accepted Fiber Diameter: 50-1000um
Data Sheet
Optical Explorer
EXFO
An innovative, fast and simple-to-use fiber optic tester, Optical Explorer verifies optical links in seconds and automatically explores further when potential issues are suspected. It’s the first optical fiber multimeter (OFM)—an essential handheld tool for fiber optic technicians (it can be compared to multimeters used by electrical ...

Specifications

Accepted Fiber Diameter: 1-50um
Data Sheet
ConnectorMax MPO Link Test Solution
EXFO
Multifiber push-on (MPO) connectors are increasingly popular because they provide many advantages to high-speed network operators, owners and installation companies. They are used to connect the fastest links that deliver the most sensitive of services and data to customers, enable high-speed interconnects and create redundancy. ...

Specifications

Accepted Fiber Diameter: 1-50um
Data Sheet
FIP-500 Fiber Inspection Scope
EXFO
Fastest inspection in the industry for both single-fiber and multi-fiber connectors, with the most reliable results. Self-contained, fully automated tool for zero-button testing all day - without the need to recharge batteries or offload results.

Specifications

Accepted Fiber Diameter: 1-50um
Data Sheet
FIBRE-OPTICS POWER METER
Ellmax Electronics Ltd
The Ellmax Fibre-Optics Power Meter is an accurate, sensitive, and versatile unit for measuring optical power levels at terminated optical cables. An easy to read pointer scale gives readings in both dBm and μW, and the meter has a broad measurement range of 1mW (0dBm) down to a sensitivity of better than 1nW (-60dBm). The Meter ...

Specifications

Detector Type: Non Specified
Response Wavelength: 820 nm
Power Range: -60-0dBm
Data Sheet
ZX-1 micro DUET+
Direct Optical Research Co
DORC’s ZX-1 micro DUET+ is the worlds first “dual headed” system, designed primarily for measuring BOTH ends of hybrid patch cords “simultaneously” using a single PC and operator. For example, both ends of a 1.25mm to 2.50mm patch cord can be measured at the same time - without the need to change chucks. Data for both ends appears ...

Specifications

Accepted Fiber Diameter: 0.5-1.8um
Data Sheet
ZX-1 micro Array+ HD
Direct Optical Research Co
Used primarily to measure multi fiber (MT/MPO® and MT-RJ) connectors, DORC’s sixth generation “ZX-1 micro Array+ HD is the result of 29 years of hardware and software product development.  Although optimized for mutifiber connectors, the ZX-1 micro Array+ HD also does an excellent job of measuring single fiber PC and APC ...

Specifications

Accepted Fiber Diameter: 0.5-1.8um
Data Sheet
ZX-1 micro PMS+
Direct Optical Research Co
Used primarily to measure single fiber PC and APC connectors, DORC’s fifth generation “ZX-1 micro PMS+” is the result of 29 years of hardware and software product development.  DORC’s patented design is based on a variant of the Michelson configuration, and provides BOTH 2D and 3D high resolution images of the sample under test ...

Specifications

Accepted Fiber Diameter: 0.5-1.8um
Data Sheet
Luna Optical Backscatter Reflectometer OBR 4600
General Photonics Corp
The OBR 4600 is an ultra-high resolution reflectometer that features a spatial sampling resolution of 10 microns, zero dead zone, and backscatter-level sensitivity. The OBR 4600 offers industry leading technology to precisely track loss and polarization states, allowing you to “see inside” your components and systems.  
Data Sheet
Luna Portable Optical Backscatter Reflectometer OBR 6225
General Photonics Corp
The OBR 6200 Series utilizes optical frequency domain reflectometry (OFDR) technology to measure distributed return loss (RL) and insertion loss (IL) with sub-millimeter spatial resolution, high precision and high dynamic range. The OBR 6200 is a rugged battery-powered integrated system with an intuitive touchscreen user interface, ...
Data Sheet
KI 6106 10G - XG PON Power Meter 1270 nm
Kingfisher International Pty Ltd
The KI 6106 series Optical PON Power Meter is used for testing FTTX PON fiber optic communications systems. Common uses include live acceptance testing during service turn-up, and fault isolation during subsequent maintenance, particularly when an ONT has failed. It is connected in-line on a live system, and simultaneously displays ...

Specifications

Detector Type: InGaAs
Response Wavelength: 1270 nm
Power Range: -30-10dBm
Data Sheet
KI2600-INGAAS Handheld Power Meter
Kingfisher International Pty Ltd
The KI 2600 Series Handheld Power Meter is used by professional installers and contractors, to test power, loss, continuity and faults on all types of fiber optic systems. It has comprehensive report generation capabilities and a variety of useful features for productivity. Various detector options cover all power levels fiber ...

Specifications

Detector Type: InGaAs
Response Wavelength: 600-1700 nm
Power Range: 10--60dBm
Data Sheet
KI 6102 GPON - PON Power Meter 1310nm
Kingfisher International Pty Ltd
The KI 6102 series Optical PON Power Meter is used for testing FTTX PON fiber optic communications systems. Common uses include live acceptance testing during service turn-up, and fault isolation during subsequent maintenance, particularly when an ONT has failed. It is connected in-line on a live system, and simultaneously displays ...

Specifications

Detector Type: InGaAs
Response Wavelength: 1310 nm
Power Range: -40-10dBm
Data Sheet
Optical Connector Polisher ATP-3200- ATP-3000
NTT Advanced Technology Corp
The ATP-3000 polishing machine’s independent pressurization jigs use a unique attachment structure, and so polishing jigs from even 1 insert (1 terminal) can be manufactured to match the customer’s request. Evaluation of risky polishing processes, such as special material quality polishing, process improvements, etc., can ...
Data Sheet
Optical Connector Cleaner
NTT Advanced Technology Corp
The cause of many troubles in optical communication equipment is contamination on the end face of optical connectors. NTT Advanced Technology’s optical connector cleaners use fiber developed specifically for optical connectors, so even the smallest contaminants not visible to the naked eye are removed. Engineered with both ...
Data Sheet
Optical Connector Cleaner Integrated Scope VIEWTOP
NTT Advanced Technology Corp
It is very important to keep the optical connector end face clean during connection.Insert the tool into the optical connector to make an observation. Then, in the same position, just use a one-push action to clean the connector.Just like that, both optical connector cleaning and end face inspection are completed by the one unit.  
Data Sheet