Optiphase-a Halliburton Service
Are you Optiphase-a Halliburton Service representative? Claim This Page Today!
No one from Optiphase-a Halliburton Service has updated the information yet
Claim Optiphase-a Halliburton Service Page to edit and add data


Frequently Asked Questions

No, the PZ2 Fiber Stretcher does not require proprietary drivers. For most low voltage applications (< ± 15V), it can be driven by standard electronics such as signal generators, op-amps, or other laboratory equipment without modification.

The PZ2 Fiber Stretcher is operational at wavelengths between 780 and 1625 nm.

The Bare Lead Fiber Stretcher includes a convenient mounting kit consisting of a top mount aluminum retainer and two silicone rubber pads. The Mounting Kit includes top or bottom mount.

The OPTIPHASE PZ2 is a fiber wound piezoelectric element used in a wide range of optical interferometric measurement and sensing system applications, including open loop demodulation, sensor simulation, white-light scanning interferometry, and large angle modulation of interferometric phase.

The PZ2 Fiber Stretcher is available with SM, commercial PM (PANDA or Bowtie), or RC (SM Reduced Cladding) fiber types.

You May Also Like