All Categories
Fiber Optomechanics

FILTER PRODUCTS

Select a category above to apply technical filters
  1. Home
  2. Fiber Optics
  3. Fiber Optomechanics

Page 6 - Fiber Optomechanics

CP112 Fiber Optic Coupler
Advanced illumination
Add to watch list
CP112 Fiber Optic Coupler
The CP112 Fiber Optic Coupler is a reliable and easy-to-use accessory that securely connects the SL112 or SL162 illuminators to Moritex, Dolan-Jenner, and Fostec fiber optic light guides. This coupler is an essential tool for users who need to connect fiber optic light guides to their illuminators with confidence and ease. The CP112 ...
Data Sheet
RFoF-40GHz-Q0-Mini High SFDR Transceiver
RFOptic
Add to watch list
RFoF-40GHz-Q0-Mini High SFDR Transceiver
RFOptic's analog RFoF compact modules enable long distance transport of wideband RF signals. The Tx unit, uses an optical transmitter, converts wideband RF signals to an Optical signal and the Rx unit converts the Optical signal back to RF signal. The two units are connected by the customer’s fiber. In general, a wide range of ...

Specifications
Peak Emission Wavelength: 1550 nm
Transmission Speed: -- Mbps
Frequency Range: 2-40 Hz
RF Gain: -28 dB
Gain Flatness: ≤ ±4.5 dB
...
Data Sheet
GLSUN OS2 OM1 OM2 OM3 OM4 Simplex-Duplex Fiber Patch Cords MTP/MPO Cables with Various Connectors
Guilin GLsun Science and Tech Group Co.,LTD.
Add to watch list
GLSUN OS2 OM1 OM2 OM3 OM4 Simplex-Duplex Fiber Patch Cords MTP/MPO Cables with Various Connectors
A fiber-optic patch cord is a fiber-optic cable capped at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch or other telecommunication equipment.   We are able to provide high quality fiber patch cords with various connector options that support fiber optic ...

Specifications
Wavelength Range: 850-1550nm
Insertion Loss (max): ≤0.35 dB
Return Loss: ≥50 dB
Polarization Maintaining: No
Operating Temperature: -40 ~+75 ℃
...
Data Sheet
Large Core Fiber Coupler - Multimode Fiber Optic Splitter
Lfiber Optic Limited
Add to watch list
Large Core Fiber Coupler - Multimode Fiber Optic Splitter
Lfiber’s large core fiber coupler (multimode fiber optic splitter: 100um, 105um, 200um, 300um, 400um, 600um, 800um, 900um, 1000um, 1500um (micron/μm)) is an optical power splitter designed to split light within ultraviolet, visible and infrared wavelengths, typically from 190 to 2500 nm.   It bases on fused ...

Specifications
Port Configuration: 1×2 ~ 1×32; 2x2 ~ 32x32
Operating Power: ≤1W, ≤5W, ≤10W, ≤50W, ≤100W, ≤300W, Others On Request
Operating Wavelength: 190 ~ 2500 nm on request
Transmission Efficiency: 80% ~ 99.5% (Typ. >90%)
Fiber Core Diameter (μm): 105, 200, 400, 600, 800,1000, Others On Request
...
Data Sheet
FB10-5033-ST Fiber Optic Adapter Multimode ST Simplex Adapter
Primus Cable
Add to watch list
FB10-5033-ST Fiber Optic Adapter Multimode ST Simplex Adapter
Our ST Simplex Adapters fit standard ST cutouts for patch panels, cassettes, adapter plates, wall mounts and more. These barrel-style metal adapters feature the twist lock design for ST interfaces and comes with mounting nut and locking washer.      The D-Shape cutout of the adapters center allows for a ...

Specifications
Connection Type: ST Simplex
Mode: Multimode
Connection Color: Metal
Footprint: ST Simplex
Data Sheet
Fiber Optic Polarization Beam Splitter
Ruik-tech Communication (Dongguan) Co.,LTD.
Add to watch list
Fiber Optic Polarization Beam Splitter
Ruik的偏振分束器设计用于将任意偏振的一束光束分成垂直于每个偏振的两束光束Ruik的偏振分束器设计用于将任意偏振的一束光束分成垂直于每个偏振的两束光束。 Ruik的偏振分束器设计用于将束束。两Ruik 的偏振分束器设计用于将任意偏振的一束光束分成垂直于每个偏振的两束光束。光路是从光纤到两根光纤。瑞克的Ruik的偏振分束器被设计成一个分中的任何光束极化成两束，每束极化垂直。光纤分束器被设计成分中的任何单独的一束两束，每束光纤。光路是从光纤到两根光纤。光纤。Ruik 的偏振分束器设计用于将任意偏振的一束光束分成垂直于每个偏振的两束光束。光路是从一根光纤到两根光纤。Ruik\'s Polarization Beam Splitter is designed to ...

Specifications
Splitting Ratio: 50/50, 70/30, 80/20, 90/10, Other
Central Wavelength: 2000 nm
Power Handling: > 100mW
Return Loss: 50 dB
Data Sheet
16Mbps POF Optical Toslink Transmitter Module-DLT1180 to replace Toshiba TORX transmitters
Bones Electronics Co., Ltd
Add to watch list
16Mbps POF Optical Toslink Transmitter Module-DLT1180 to replace Toshiba TORX transmitters
The POF Optical Toslink Transmitter Module-DLT1180 to replace Toshiba TORX transmitters is a standard-package product with connector and opto-electric component packaged with PD and I/V amplifier IC. The function of unit changes the light signal into electric signal. The unit is operated at +5V and the input signal is TTL ...

Specifications
Peak Emission Wavelength: 650 nm
Transmission Speed: 16 Mbps
Typical Dissipation Current: 6.5 mA
Working Voltage: 2.7~5.5 Volts
Fiber Coupling Light Output: -24~14.5 dB
Data Sheet
High Temperature of 200°C 1x2(2x2) Singlemode Fiber Splitter Coupler
LightOptics
Add to watch list
High Temperature of 200°C 1x2(2x2) Singlemode Fiber Splitter Coupler
The high temperature of 200°C fiber optic coupler is based on fused biconical taper technology and compact packaging structure. It features good uniformity, low excess loss and very low polarization sensitivity. This 1x2 fused splitter features of High Sustained Temperature, Low PDL, High Directivity with stable and reliable ...

Specifications
Vendor: LightOptics
Configuration: 1x2 2x2
Wavelength: 1550nm 1310nm
Data Sheet
(6+1) × 1/(18+1) ×1 Fiber Pump Signal Combiner
Shenzhen Oscom Technology Co., Ltd
Add to watch list
(6+1) × 1/(18+1) ×1 Fiber Pump Signal Combiner
(6+1)×1/(18+1)×1 fiber pump signal combiner features high pump efficiency, low insert loss, cost-effective, stable and reliable. This combiner can be integrated into medium and high power fiber laser, fiber amplifier, and R&D test equipment

Specifications
Splitting Ratio: 50/50
Central Wavelength: 800-1600 nm
Power Handling: > 100W
Return Loss: 45 dB
Pump Wavelength: 800～1000nm
...
Data Sheet
1x2/2x2 or 1x3/3x3 PM Fiber Coupler
Shenzhen Oscom Technology Co., Ltd
Add to watch list
1x2/2x2 or 1x3/3x3 PM Fiber Coupler
XHP 1×2/2×2 and XHP 1×3/3×3  polarization maintaining fiber coupler features low insert loss, wavelength and coupling ratio can be customized, stable and reliable. It can be integrated into fiber gyroscope, fiber sense, fiber measuring equipment and PM fiber amplifier etc.  

Specifications
Port Type: 1x2/2x2/1x3/3x3
Operating Wavelength: 780-2000nm nm
Bandwidth: +-20+-30 nm
Excess Loss: ≤0.3 dB
Extinction Ratio: ≥15 dB
...
Data Sheet
PM (N+1) ×1 PM Fiber Combiner
Shenzhen Oscom Technology Co., Ltd
Add to watch list
PM (N+1) ×1 PM Fiber Combiner
PM(N+1)×1 Polarization maintaining fiber combiner features high pump efficiency, low insert loss, high extinction ratio, stable and reliable. This combiner can be integrated into medium and high power fiber laser, fiber amplifier, fiber sense system and R&D test equipment. Please use the "REQUEST QUOTE" button to ...

Specifications
Splitting Ratio: 50/50
Central Wavelength: 800-1600 nm
Power Handling:
Return Loss: 45 dB
Pump Wavelength: 800～1000nm
...
Data Sheet
Apodized FBG
AtGrating Technologies Co, Ltd.
Add to watch list
Apodized FBG
Apodized FBG is a wavelength-reflecting optical device produced by ultraviolet light and phase mask inscription on the optical fiber. It is a basic optical fiber sensing element and is widely used in the fields of optical communication and sensing. AtGrating adopts advanced production technology and Apodized technology to mass ...

Specifications
Center Wavelength Range: 1460-1610nm
FBG Length: From 1mm to 20mm
Reflectivity: <=1%
Wavelength Tolerance: +/-0.5 nm
Bandwidth (FWHM): 0.1~1.2 nm
...
Data Sheet
FBG Wavelength Locker
AtGrating Technologies Co, Ltd.
Add to watch list
FBG Wavelength Locker
The wavelength of pump laser diode is varied at different operating temperatures. Fiber Bragg Gratings (FBG) Wavelength Locker with low reflectivity is used to stabilize the wavelength and intensity of EDFA pump laser. It can stabilize the channel wavelength to ITU-T Grid standard wavelength in DWDM systems, network monitoring and ...

Specifications
Center Wavelength Range: 940-1070nm
FBG Length: 1 mm, 15 mm, 10 mm, 5 mm, 3 mm
Reflectivity: >1%
Center Wavelength: 940, 972-978, 1064, 1070 nm
Wavelength Tolerance: +/-0.25 nm
...
Data Sheet
Long Period Fiber Grating (LPFG)
AtGrating Technologies Co, Ltd.
Add to watch list
Long Period Fiber Grating (LPFG)
Long Period Fiber Grating (LPFG) is formed by the periodic refractive index modulation in the fiber axis, and its period is generally larger than 100µm. Its coupling mechanism is: the fundamental mode of the fiber core transmitted forward is coupled into the cladding mode of the forward transmission of several specific ...

Specifications
Center Wavelength Range: 1530-1625nm
FBG Length: >25 mm, 25 mm, 20 mm
Reflectivity: Not Specified
Transmission Loss: >90 %
Bandwidth (FWHM): 1~3 nm
...
Data Sheet
1550nm / 1064nm 1x2 2x2 Polarization Maintaining Optical Fused Coupler/Splitter
RUIK-TECH COMMUNICATION (Dongguan) CO.,LTD
Add to watch list
1550nm / 1064nm 1x2 2x2 Polarization Maintaining Optical Fused Coupler/Splitter
熔接耦合器用于在两根光纤之间分离光信号，或将来自两根光纤的光信号组合成一根光纤。它们是通过将两根纤维融合在一起并逐渐变细而构成的。RUIK 的熔接耦合器有多种波长、光纤尺寸和分光比可供选择。光纤末端可以用各种光纤连接器端接。标准配置为 1x2 和 2x2 耦合器。N by M 熔断器，如 1x3 或 1x4 等，也可根据要求提供。RUIK\'s fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. ...
Data Sheet
Athermal Packaged FBG
AtGrating Technologies Co, Ltd.
Add to watch list
Athermal Packaged FBG
Athermal Packaged FBG is a method of compensating the temperature coefficient of fiber grating with a negative temperature coefficient packaging sleeve. It uses a material that does not have a negative temperature coefficient. The encapsulation sleeve can just fully compensate the wavelength drift caused by the temperature change of ...

Specifications
Center Wavelength Range: 1460-1610nm
FBG Length: 1 mm, 15 mm, 10 mm, 5 mm, 3 mm
Reflectivity: 3 - 90%
Bandwidth (FWHM): >0.2 nm
Insertion Loss: <0.2 dB
...
Data Sheet
1310nm 12x(1x2) SM Fiber Fused Coupler
Seagnol Photonics Co. Ltd
Add to watch list
1310nm 12x(1x2) SM Fiber Fused Coupler
1310nm 12x(1x2) SM Fused Coupler is built with fused biconical taper (FBT) technology, it integrated with 12pcs 1x2fused coupler with a compact package, optical signal power can be splitted into two parts with even or various couplingratio by the FBT Coupler, it\'s widely applied in fiber optic transmission and fiber optic sensor ...

Specifications
Wavelength: 1310 nm
Configuration: Nx(1x2)
Max. Excess Loss: 0.3 dB
Coupling Ratio: 1~99 %
Data Sheet
Tunable fiber Bragg grating
FLT INC
Add to watch list
Tunable fiber Bragg grating
The tunable fiber gratings are based on our innovative patented tuning technology that utilizes pure compressive strain tuning to achieve a large wavelength tuning range.The fiber grating tuner is designed to tune the wavelength of various types of fiber grating including fiber Bragg grating, phase-shifted fiber grating, or long ...

Specifications
Center Wavelength Range: 1060-2000nm
FBG Length: Custom
Reflectivity: 30 - 99%
Wavelength Tuning Range:: >20 nm ~ 50nm
Data Sheet
High Power Fiber Optical Combiner (Multimode Fiber Coupler)
Lfiber Optic Limited
Add to watch list
High Power Fiber Optical Combiner (Multimode Fiber Coupler)
This UV-VIS-NIR fiber combiner (optical power combiner: 50/125, 105/125, 200/220, 400/440 (400/430), 600/630, 800/830, 1000/1100 μm) is a large core fiber-based passive optical component that combines two or more optical power inputs into one fiber output. The input/output multimode fibers are available from 50 μm (micron) to ...

Specifications
Port Configuration: 2x1, 3x1, 4x1, 5x1, 6x1, 7x1, 8x1, 9x1, 10x1 ~ 32x1
Connector: None, SC/PC, FC/PC, ST, SMA905, Custom
Operating Wavelength: 200-1600nm (on request)
Transmission Efficiency: 80% ~ 99.5% (Typ. >90%)
InputFiber Core Diameter (μm): 50, 105, 200, 400, 600; Others On Request
...
Data Sheet
Single-Mode (NOn-PM) or Polarization-Maintaining(PM) Fiber Optic Coupler for Infrared Light
Lfiber Optic Limited
Add to watch list
Single-Mode (NOn-PM) or Polarization-Maintaining(PM) Fiber Optic Coupler for Infrared Light
Lfiber’s Single-Mode (NOn-PM) or Polarization-Maintaining(PM) Fiber Optic Coupler for Infrared Light(visible/infrared light beam splitter: 405nm, 430nm, 450nm, 457nm, 460nm, 473nm, 488nm, 532nm, 630nm, 633nm, 635nm, 650nm, 780nm, 830nm, 850nm, 980nm, 1064nm, 1480nm, 1570nm, 1590nm, 1625nm, 1700nm, 2000nm, etc.) is the standard ...

Specifications
Port Configuration: 1x2, or 2x2
Connector: None, LC/UPC, LC/APC, SC/UPC, SC/APC, FC/UPC, FC/APC, ST, MU, Custom …
Center Wavelength (nm): 780~2000nm (Optional), Typical Infrared Light of 780, 830, 850, 980, 1064, 1480, 1570, 1625, 1700, 1590, 2000 nm
Insertion Loss (dB): ≤3.6
Fiber Type: Single-Mode (NOn-PM) or Polarization-Maintaining(PM) Fiber
...
Data Sheet
Single-Mode and Polarization-Maintaining Fiber Coupler (Visible Light Fiber Optic Splitter)
Lfiber Optic Limited
Add to watch list
Single-Mode and Polarization-Maintaining Fiber Coupler (Visible Light Fiber Optic Splitter)
Lfiber’s Single-Mode and/or Polarization-Maintaining Fiber Coupler\'s operating wavelength is in visible wavelength ranges from 400 to 700 nm, typically 405nm, 430nm, 450nm, 457nm, 460nm, 473nm, 488nm, 532nm, 630nm, 633nm, 635nm, 650nm. Other wavelengths are also available upon request, and optimized fibers for any ...

Specifications
Port Configuration: 1x2, or 2x2
Connector: None, LC/UPC, LC/APC, SC/UPC, SC/APC, FC/UPC, FC/APC, ST, MU, Custom …
Center Wavelength (nm): 400~700nm (Optional), Typ. wavelengths of 405nm, 430nm, 450nm,457nm, 460nm, 473nm, 488nm, 532nm, 630nm, 633nm, 635nm, 650nm, Others on Request
Fiber Type: Single-Mode (Non-PM) or Polarization-Maintaining (PM) Fibers
Split Ratio: 50/50, 60/40, 70/30, 80/20, 90/10, 95/5, 98/2, 99/1, Custom …
...
Data Sheet
Single-Mode Fiber Optical Collimator
Lfiber Optic Limited
Add to watch list
Single-Mode Fiber Optical Collimator
Fiber-optic collimation and focusing assemblies, together known as fiber collimators, are used for getting enlarged collimated beams out of the optical fibers or for focusing the enlarged beams into the optical fibers. LFIBER offers high-quality fiber collimators with a variety of wavelengths, including 450 nm, 460 nm, 630 nm, 632 ...

Specifications
Center Wavelength Nm): 450, 460 630, 632, 650, 780 ,850 ,980 ,1064, 1310, 1550
Connector: None, FC/UPC, FC/APC, SC/UPC, SC/APC, LC/UPC, LC/APC, Others
Working Distance (mm): 5, 10, 20,50; Others upon request
Fiber Type: Single-mode fibers
Return Loss (dB): ≥55 (UPC), ≥60 (APC)
...
Data Sheet
Polarization Maintaining (PM) Fiber Collimator
Lfiber Optic Limited
Add to watch list
Polarization Maintaining (PM) Fiber Collimator
LFIBER\'s polarization maintaining (PM) fiber optical collimator (450nm 460nm 630nm 632nm 650nm 780nm 850nm 980nm 1064nm 1310nm 1550nm 2000nm) is used to launch a beam of light from an optical fiber into free space and then to capture that light and refocus it into the same or another fiber. By using Panda polarization maintaining ...

Specifications
Center Wavelength（nm): 450, 460 630, 632, 650, 780, 850, 980, 1064, 1310, 1550, 2000
Connector: None, FC/UPC, FC/APC ,SC/UPC, SC/APC, LC/UPC, LC/APC, Others
Extinction Ratio (dB): ≥20, ≥25, ≥30, ≥35
Working Distance (mm): 5, 10, 20, 50; Others upon request
Fiber Type: Panda PM Fibers
...
Data Sheet
1250nm-1650nm Variable Optical Attenuator Fiber SMF-28e-9/125
Laserse Inc.
Add to watch list
1250nm-1650nm Variable Optical Attenuator Fiber SMF-28e-9/125
Adjustable optical attenuator uses high precision adjustable attenuator, combined with embedded data processing platform, to provide a maximum of 30/60 dB of accurate attenuation. The RS232 communication interface is built in the attenuation meter, and the user can realize remote control of the attenuation meter through the RS232 ...

Specifications
Number Of Channels: Multi Channel
Operating Wavelength Range: 1250-1650nm
Dynamic Attenuation Range (max): 0-60 dB
Insertion Loss (max): 1.0 dB
Return Loss (min): 1.0 dB
Data Sheet
AMG5413R Single Channel Fibre Optic CCTV Transmission Solutions
AMG Systems Ltd
Add to watch list
AMG5413R Single Channel Fibre Optic CCTV Transmission Solutions
The AMG5400 and AMG5500 Series are designed for low cost, point-to-point transmission of multiple low speed data, audio and alarm channels The AMG5400 is designed for multimode fibre, whilst the AMG5500 is designed for singlemode fibre. The products come in a variety of channel options in mini, standalone and rackmount formats to ...

Specifications
Peak Emission Wavelength: 1310 nm
Transmission Speed: 0.512 Mbps
Data Sheet