Incoherent Light Sources
Charged Particle Sources
Optics Manufacturing
Optical Systems
Opto-Mechanics
Engineering Services
Spectral Analysis
Imaging and Vision
Metrology and Inspection
- Home
- Engineering Services
- Design and Manufacturing
- Engineering Services
- Laser Drilling
Laser Drilling
OVERVIEW
Laser hole drilling of vias, micro holes, pinholes, nozzles, orifices, and slots meet a variety of applications such as instrumentation, print heads, bio-sensors, high-density interconnects, filters, medical devices, and aerospace components. Dimensional and positional tolerances of 5um or better are achieved.
MLT laser drilling processes utilize various wavelengths including ultraviolet (UV), infra-red (IR), or hybrid (both UV and IR) depending on the hole diameter and material selection. Hole quality is subjective to the criteria of the design’s form, fit, and function. Process time or cost may also determine the level of quality required.
Laser produced hole quality is assessed in terms of roundness, taper, entrance and exit diameter tolerances, oxidation (i.e. metals), burring or recast layer, and micro-cracking (i.e. glass). Aspect ratios and material selection are elements that contribute to straight wall or tapered hole profiles. Laser drilling can be used to produce 10um and larger diameter holes in most any material including metals, ceramics, plastics, silicon, rubbers, and glass. MLT laser drilling processes match the optimal wavelength and beam profile for the absorption property of the specified material. These processes are derived from two core laser drilling methodologies, percussion and trepanning.
SPECIFICATION
- Type Of Service: Engineering design
KEY FEATURES
- Alignment and Scale Methodologies for Minimal Annular Ring Requirements
- Large Via Process Technology that Inhibits Target Pad Delamination
- Lot/Panel Scale Reporting and Analysis for Drill Optimization
- Via Trax ™ Technology for Target Pad Surface Texturing
- Processes for IPC High Density Interconnect Types
- Advanced uVia Diameters Less than 25um
- 100% uVia Vision Inspection (In Development)

Claim Micron Laser Technology Inc Page to edit and add data
You may also like
-
Friedrich And Dimmock Inc. SolutionsFriedrich & Dimmock Inc
-
FNE Engineering ServicesFiber Network Engineering Co Inc
-
FEMTOprint 3D PRINTING FOR GLASS MICRODEVICESFEMTOprint SA
-
GWI Sapphire OpticsGWI Sapphire Optics
-
Coating Design And AnalysisHelia Photonics Ltd
-
High Precision Machining Of Hard MaterialsInsaco Inc
-
Optical FabricationInrad Optics
-
Crystal GrowthInrad Optics
-
Optical EngineeringINOV Optical Development
-
Laser Safety AssessmentsLVR Ltd
-
Optical Engineering ServicesLightTrans International UG
-
LDX Optronics ServicesLDX Optronics Inc
Don’t have an account?
Please consider registering
NOTE: It may take up to 10 min to receive the registration verification link. For immediate assistance please use the “GUEST” option above.